View Full Version : looking 4 leverage multiplier 4 HF bender
05-04-2004, 01:15 AM
Too anyone out there,
I,m looking for plans, info, pics, or web sites on constructing a leverage multiplier kit for the Harbor Freight compact bender, bench or floor stand type. Any info on this subject is appreciated.
Best thing I can think of is look at the Shop Outfitters site and use that for your model. Never have seen one for the HF bender.
05-08-2004, 03:21 AM
I've found some info on the leverage multiplier on the U.S. Patent Office under patent # 5626045, http://www.uspto.gov/patft/index.htm
It gives good detailed drawings and theory of operation of the device. The only thing it does not give is exact specs. I think with a little studing, someone could adapt the assembly to the Harbor Freight bender. The only thing about this site is that you need to have a Tiff viewer that they specify in order to view and save the drawings. The viewer is free to download and easy to install. I hope this helps. Also I hope you can post your pics if you try this project.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.