View Full Version : Would this compressor work well with the 50D?
12-03-2008, 01:27 AM
I have this compressor http://www.sears.com/shc/s/p_10153_12605_00916760000P?mv=rr and I'm thinking about purchasing the 50D. thanks
12-03-2008, 02:58 AM
the ForceCut LP-50D asks for: Air requirements: 60-75psi @ 4.5cfm
the Craftsman 26 gal. Air Compressor specs: SCFM Delivery At 90 psi: = 4.9 SCFM
12-03-2008, 03:41 AM
That one is nice, but also look into this one as it is cheaper and has a bigger tank:
I think it is on sale and has a bigger gallon capacity, which in my opinion better. You will lose 10psi at max, but for the plasma cutter it does not matter.
Best of luck.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.