View Full Version : R Lloyd
12-08-2008, 05:19 AM
I recently baught a little Lincoln AC/DC 225/125 welder. It worked fine when I welded with it when I bought it but here at home only the fan runs, no spark at the work end. I oened the unit up to see if there was any loose connections but did not see any thing . Any idea's or input would help alot. thanks
12-08-2008, 07:24 AM
Do you have the ground clamp properly attached to your workpiece?
12-08-2008, 07:50 AM
Check your plug and or receptical, sounds like you only have 110 volts going into the machine. Also check your ground as was already suggested.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.