WANTED: ESAB Control cables

[cfordaz]

I picked up an old Linde (ESAB) Trimpower SVI 300 power supply which came with a L-Tec Digimig wire feeder. I need the two control cables that connect them. If anyone has the cables around that they don't have a use for I would be willing to pay a reasonable amount for them. This is the old style Digimig which has two control cables coming into the back instead of one.
These are the part numbers I need if they are of any help.

ESAB Model 678399 6' Control Cable
ESAB Model 996735 6’ Control Cable

I would just buy them from a dealer but ESAB seems to think they are made of solid gold or something judging by the price.
Thanks,
Calvin

[ctardi]

What is the model of the jack (not the unit)? or do you have a photo of the plugs?

[smithboy]

If you go to www.mouser.com, you can probably find a match on the connectors and build your own. Another alternative is to replace the connectors with more common new ones.

[cfordaz]

What is the model of the jack (not the unit)? or do you have a photo of the plugs?

Attached are pictures of the connectors on the feeder and power supply. If I can't find cables I'll have to make some I guess.
Calvin

[derrik]

What you have there is typical of a "cannon plug" (ITT-Cannon is the manufacturer and thats why they call'em cannon plugs & they are widely used throughout the aviation industry). I think there might be other manufacturers, but i hopethat helps a little. ooh, and the official FAA certified cannon plugs are pretty pricey. I wish you luck.

[handsonexperience]

One of my bestest ol' buddies is in the welding machine repair biz,,I'll show him the photos and see what he's got or if he can find 'em.