PDA

View Full Version : Novice from CA



__Tango
05-04-2010, 11:15 AM
Hey folks.

I'm a newbie welder from the bay area california (mountain view in particular). I've got a project where I'm putting together a battery frame for an electric motorcycle using aluminum (6061-T6 and 6063-T52) angle, square tube, and rectangular tube.

I'm currently learning how to TIG weld, and using a ArcMaster 200 AC/DC at a place called the TechShop.

Man, have i got questions...i've been cruising through the boards here and have picked up a bunch of good info, but i'm sure i'll have lots of questions real soon. :)

Anyway, that's it for now. Thanks!

...tango...

tanglediver
05-04-2010, 04:10 PM
Hey, how's it going? :waving: You've got questions, we've got answers.


Please ring bell for service. (http://www.ilovewavs.com/Effects/Cartoons/HitAnvil.wav)

specter
05-04-2010, 09:32 PM
Hi Ya _Tango and Welcome to the Welding Web Family. For answers to your questions wander into the General Welding Questions forum.