150mm and up thickness plasma cutting

[haiitimes]

I have a friend who are refering to me for setting up a cnc plasma cutter to cut 150mm round steel( piercing and edge cutting), i am now wondering who has the right solution at the least quotation to make this a successful project.

please send me the solutions details, with thanks.
roberto.

[haiitimes]

please note
i need a completed cnc set to complete the job of cutting round steel, profiles. up to 150mm , please just contact me via msn cydp at hot mail dot com

[jimcolt]

160 mm is the maximum you can cut with a plasma cutter....this thickness requires power levels of 800 to 1000 Amps. On materials above 3" thickness an edge start is mandatory.....no piercing. Attached is a link to the New Hypertherm HPR800XD system with a video showing a cut on 6-1/4" stainless steel (160 mm)

Jim Colt
http://www.hypertherm.com/en/Products/Mechanized_Plasma/Systems/HyPerformance_Plasma/hpr800xd.jsp