2011 Everlast PowerMTS 160 and 200S Synergic Mig/Tig/Stick DIGITAL WELDER

[EVERLAST]

The PowerMTS series, with MIG, TIG, and stick capabilities, is a new line from Everlast for 2011. Previously we announced the portable PowerMTS 400. Now, we are announcing the introduction of PowerMTS 160 and 200S. Both are extremely portable and lightweight. With a euro quick connect on the MIG, and built-in TIG gas valve, the unit is completely self contained. The units will hold up to a 11 lb roll of wire. The PowerMTS 160 features digital 160 amp MIG with arc force control. Additionally, the PowerMTS 200 features synergic function of the 200 amp MIG function. Simply select wire diameter, wire type, and wire speed control is auto set. If desired, the 200S can be operated in regular mig mode as well. DC tig function feature down slope and post flow control. Stick function is smooth and with low spatter.

These units are ideal for portable repair or light fabrication. The PowerMTS series can give you the flexibility you need to go anywhere, and weld almost anything.

PowerMTS 160 retail 949.00 with accessories
PowerMTS 200S retail 1249.00 with accessories

[lugweld]

It has a wave form control as well, which is sometimes referred to arc force, inductance, or slope on mig, and dig on stick.

[smawgmaw]

Hey Lugweld, I checked out Everlast's site for these, but I didnt see them listed unless I missed them. Are they on the site?

[lugweld]

Not yet, We are adding them, but we will have to wait a few days to get them up. But in the meantime, you can pm me or ask what you are looking for here.

[smawgmaw]

My HTP MTS 160 in shop for repairs. If its terminal, or more expense to repair than its worth, I may be considering one of these in the future.

[lugweld]

I think you will find these to be quite exceptional and well designed.

[smawgmaw]

Basically my questions would be wire size capabilities, duty cycle, input amp draw, weight, and accessories included of each unit.

[lugweld]

No problem.

Duty cycle:
160; 30% @ 160 amps, 60%@ 115 amps
200S; 25% @ 200 amps, 30% @170 amps, 60%@ 115 amps

Voltage:220V

Input Amps:
160; 27 for MIG, 22 for TIG, 31 for Stick
200S; 37 for MIG, 29 for TIG, 33 for stick

Weight:
160 25 lbs approx
200S 30 lbs approx

Wire sizes .023-.040 for both, with aluminum drive rolls. .045 is possible with steel. 2-12 lb rolls (up to 8 inches)

200 S is synergic function mig with automatic setting of voltage based off selected wire diameter and metal type. ONly manual manipulation of the wire speed is required. The unit automatically compensates the voltage. Manual overide is a function (ALT) so that it can function in a normal mig mode. Also includes inductance (wave form) control.

160 is a standard functioning mig with wave form

Both feature 2T/4T function of MIG/TIG with both featuring down slope and post flow controls for both. TIG is lift arc, with arc force control for Stick.

Torches include Genuine 8 ft trafimet MIG torch, 300 amp stick electrode holder, 200 amp trafimet style tig torch.

And both feature burn back control.
[/LIST]

[smawgmaw]

Thanks Lug, thats info I was looking for. One other question. Max amps for functions of each: Tig? Stick? and Mig? of each unit?

[lugweld]

MTS 160:

MIG 25-160, TIG 10-160, Stick 10-160

MTS 200S:

MIG 25-200, TIG 10-200, Stick 10-170 Amps

Stick volts 58, with MTS 200S having VRD.

[smawgmaw]

Ok, thanks a bunch Lug. Waiting to see outcome of my HTP and then will decide. Thanks a lot for the info!

[EVERLAST]

MTS units went into production !
Thank you all who ordered them !

[EVERLAST]

update: Units should ship out end of the month right before the Chinese new year.

[Tritium]

Hi Oleg,

What is the status of the MTS units. I did not even know about them until I found this thread.

Thurmond

[EVERLAST]

Units in stock ! Will ship all preorders on Monday

[EVERLAST]

2011 MTS200S on sale ! we need room for 2012 models.. pretty much same unit .. few minor internal difference.

call for a special price