Can we weld black steel pipe to steel plate using MIG (Argon)

[gregbasha]

Please inform me with thanks,
Can we weld black steel pipe (O.D. 42mm seamless schedule 40 DIN2448) to a steel plate (30 x 30 cm) with MIG (inert gas: Argon)? Is it acceptable or completely rejected.
As in the following diagram, The pipe shall support for a downward force about (98 N), creating a moment on the welding point about (30 N.m.).
Surrounding temperature: 20 to 50 Deg Celsius.


:
:
:
:
:
::::::::::::::::::: Weight = 10 kg on the end of pipe
:weld
: point
:
:
plate


Can I weld the pipe to plate with Argon welding (which is more easier for me) or it's completely wrong ??

Thank & Best Regards

[gregbasha]

I'm Sorry For Confusion
It's Not Mig, It's Gtaw (and Filler Rod Is Stainless Steel)
Can It Be Accepted Or Completely Wrong ?

[steel shot]

If your gonna GTAW (tig) it, sounds like to me you need to be using ER70S2.. That is if your talking about carbon steel pipe and plate.
I wouldent weld it with stainless wire unless it was ER309 and not in an industrial atmosphere...On the farm? Yes!!!!

ss

[TxRedneck]

Steel got it right. Argon with tig(GTAW) will be great. Use the ER70S wire. Good luck