lincoln 3200hd

[JS905]

anybody got one ? i welded with one for about an hour today and that was a bad little sum B !!! i was really surprised with the performance of it, so since i dont have a welder except my arc im gonna get a 3200hd pretty soon...and a mig bottle. anyone know where to get it cheaper that $459 thats what homedepot priced at

[Pentawelder]

-JS905- I do and it's great!! A rebadged 135. We built a deck using 2x2 steel last year in the heat of California summer ... never hit the duty cycle shut down. Best of the 110 volt IM(very)HO!!

[Pentawelder]

This is the pic I meant to attach! The HD3200 is there and Weldgirl working upside down. No-one told her that it's hard to weld the bottom of the joins so she just did it!!!

[MAC702]

I have very good experiences with reconditioned units, so look at this one for $436 with no sales tax: http://cgi.ebay.com/LINCOLN-SP135T-MIG-WELDER-REFURBISHED-120V-U1873-1_W0QQitemZ7613129381QQcategoryZ113743QQrdZ1QQcmdZ ViewItem

I also was very happy with a reconditioned Hobart HH135 that I bought from www.toolking.com for only $327 shipped.

[98SS]

I apologize for reviving a thread from the grave, but rather than making a new thread, I thought I'd point out that Home Depot has the 3200HD for $459, BUT they have also been sending out coupons for 20% off your purchase over $299 when you buy it using your Home Depot credit card.

That makes the welder $367.20 and interest free for 6 months! I think I'm going today to get it! :blob3:

[Diablito]

98SS, where did you get that coupon? in the mail or newspaper? Been looking for one, can't seem to find one. thanks, Rik

[wallythacker]

It can't be beat if you can get it for the 20% off at HD. I used my friends last year and I loved it. I would buy TWO in a minute for $367/each. (My Dad would like one. Anyhow, moot, HD Canada has no such deal going.)

Anyway, don't neglect the HH140. It can sometimes be had on sale with free cart/shipping around the $450 mark.

Not to start any product flame war here :nono: but I <b>was</b> totally set on getting a HH140. However, the high price of it in Canada (vs. the Linc) and a couple of details about the Hobart innards turned me red :D

[ralphiejantz]

Great 110volt machine I just bought one used from someone that was just about brand new even came with a full helmet and full bottle of gas and a couple spools of wire for $250
I just used it today to weld up some tabs on my frame rails for my motor plate and mid plate

[Visorblue]

Great 110volt machine I just bought one used from someone that was just about brand new even came with a full helmet and full bottle of gas and a couple spools of wire for $250
I just used it today to weld up some tabs on my frame rails for my motor plate and mid plate

Congrats! You're now on my "I hate you!" list. :laugh:

Awesome deal!

[Diablito]

Got my 3200HD last Friday, got some practice welds in over the weekend, Not bad. I'm just used to my stick welder. Would it hurt the welds strength if I used a 12ga. 50' extension cord? thanks, Rik

[wallythacker]

You'll read different things about extension cords from different vendors.

You should be OK with that cord.

[migman]

12 ga is a little small, but they have a 10 ga 50' cord at hd for $54

[MAC702]

#12 is fine for a 120V welder. Their duty cycles will never heat that wire, even drawing 20-25A for as often as they are capable of it.

[bbseay]

I have a lincoln pro mig 135 lowes special that I never use it has regulator and everything needed to weld. I have used it a total of 10 hours. It even works well on aluminum IMHO.
I also have a squarewave tig 175 unit with pulser ready to weld, regulator, footpetal, torch, undercarriage wheels. I want to sell both for $1,295.00. I am in Knoxville, TN CAll 865-382-6392 8 am to 6 pm if you are interested.

Billy

[philip999]

anybody got one ? i welded with one for about an hour today and that was a bad little sum B !!! i was really surprised with the performance of it, so since i dont have a welder except my arc im gonna get a 3200hd pretty soon...and a mig bottle. anyone know where to get it cheaper that $459 thats what homedepot priced at

I have the 3200 hd with the gas bottle- rarely used- about a year old $300 firm I live in PA-
let me know if you are interested call Felix at 570-815-0515

[philip999]

Sorry, mistake- have the 175 HD with gas bottle $300 firm570-815-0515

[roadkillbobb]

Sorry, mistake- have the 175 HD with gas bottle $300 firm570-815-0515

where in PA are you , I might be intrested in that? Im on long island

[WookieWelding]

interestin when did this become a forsale thread:nono:

[tanglediver]

About two and a half years ago. Pretty good service life for a five and a half year old thread! :p

[RussellF]

I still have mine and it works fine........I don't use it as often as I would like though. I built a truck rack about 7 years ago and it still works fine. Just needs a paint job though.