Hypentherm

[ed mac]

is there a rep. from hypentherm here

[Rbeckett]

Yeah, it's Jim Colt. He's a standup guy if you need help.
Bob

[specter]

Yep Jim Colt of Hypertherm has been a member of Welding Web since Join Date
10-04-2007 and has Total Posts 923 we have had the Hypertherm Forum here since 01-13-2010

[SundownIII]

Is someone asleep at the switch?:laugh:

[Mick120]

Trust me...if Jim doesn't answer in quick time, there's a damn good reason.

[ed mac]

thanks guys
can he send me a catalog

[Pro-Fab]

Their website lists all of their available plasma equipment as well as the specificatons. If you are looking to buy direct from the factory, I am afraid you will be disapointed. Mr.Colt is a technical advisor, not a salesman.

[Mick120]

thanks guys
can he send me a catalog

Ed,
You can download any brochure direct from the Hypertherm website.

http://www.hypertherm.com/

They don't sell direct to the public but have a large dealer base, just click on "where to buy", from the products drop down menu.

Mick.
Aussie

[ed mac]

Ed,
You can download any brochure direct from the Hypertherm website.

http://www.hypertherm.com/

They don't sell direct to the public but have a large dealer base, just click on "where to buy", from the products drop down menu.

Mick.
Aussie

i dont download catalogs and i dont pay for them
Grizzly,Enco,Northern Tools,and Outwater send me
there catalogs for free. Grizzly send me a cat at cost
of $4.95 Outwater is more and there cat is over 1000 pgs
i asked for a miller cat. and thet sent it to me Priority Mail
wheres jim, no pm I think ill go with a miller 875

[Mick120]

Maybe you need to read the corporate responsibility statement on the Hypertherm website.
At least they've got a conscience about the environment so, rather than wasting paper and resources sending hard copies, it looks like they've moved with the times and offer downloads instead.

Maybe more companies need to start doing the same thing, that way, the money they save on not printing and postage could go towards lowering prices.

The thing I find hard to understand is, if you're on the internet anyway asking for guidance, why would you be so hard nosed about something as trivial as a hard copy catalogue??

[SEAR]

The thing I find hard to understand is, if you're on the internet anyway asking for guidance, why would you be so hard nosed about something as trivial as a hard copy catalogue??

you read this question too right? ;)

thanks guys
can he send me a catalog

[Mick120]

Sure did.
I just don't understand why someone would get their shorts bunched over something so trivial.
If you're on the internet anyway, what's wrong with downloading a PDF?

Unless of course, he's still on dialup....:rolleyes:

[jimcolt]

ed mac,

Sorry I did not see your message...I search this site daily and somehow missed it. I can send you any piece of literature you would like....iuf you want it in print form. Give me an indication of what type of literature and what type of info. We have hand held plasma systems from 30 to 200 amps, mechanized plasma systems from 45 to 800 amps. We also have a variety of cnc controls, torch height controls for cnc machines, as well as CAM nesting software. Also a pretty full line of plasma and laser cutting consumables, and a 1.5kWfiber laser cutting system. There is not a single catalog for all products.

You can contact me directly at www.hypertherm.com, PM me at this site, or post your question, request on this forum...I'll be happy to help out. PM sent as well.

Best regards, Jim

[Pro-Fab]

ed mac,

Sorry I did not see your message...I search this site daily and somehow missed it. I can send you any piece of literature you would like....iuf you want it in print form. Give me an indication of what type of literature and what type of info. We have hand held plasma systems from 30 to 200 amps, mechanized plasma systems from 45 to 800 amps. We also have a variety of cnc controls, torch height controls for cnc machines, as well as CAM nesting software. Also a pretty full line of plasma and laser cutting consumables, and a 1.5kWfiber laser cutting system. There is not a single catalog for all products.

You can contact me directly at www.hypertherm.com, PM me at this site, or post your question, request on this forum...I'll be happy to help out.

Best regards, Jim

Ed, I am sure that your local supplier has the brochures in their showroom. I have picked up both Hypertherm and Thermadyne pamphlets on a number of occasions. You don't require information on precision plasma or cnc controllers, so just gather information on the equipment that you are seriously considering.

[SundownIII]

Sounds like ed mac is just trying to be a pr1ck.

[ed mac]

Maybe you need to read the corporate responsibility statement on the Hypertherm website.
At least they've got a conscience about the environment so, rather than wasting paper and resources sending hard copies, it looks like they've moved with the times and offer downloads instead.

Maybe more companies need to start doing the same thing, that way, the money they save on not printing and postage could go towards lowering prices.

The thing I find hard to understand is, if you're on the internet anyway asking for guidance, why would you be so hard nosed about something as trivial as a hard copy catalogue??

the environmemt ? what a scam
Al Gore spends $11,000 a month on a electric bill just for
one of his houses. in tenn. and he tell me to ride a bike
is this what hyperthem thinks

[ed mac]

Trust me...if Jim doesn't answer in quick time, there's a damn good reason.

no good reason ok if your everlast there is

[Boostinjdm]

Ed,
please don't breed.

[jimcolt]

Ed,


I sent you a PM a few days ago, and also posted on this thread....both stating that I would send you any Hypertherm literature that you may be interested in. We are manufacturers of plasma cutting equipment....not distributors of a wide range of products....so, like almost all other manufcturers we offer individual brochures for each of our products, hand held plasma, air plasma, and mechanized plasma to 800 amps. There is no catalog.

As soon as I hear from you...I'll be happy to send whatever literature you would like....and there has never been any cost for Hypertherm literature.

Best regards, Jim Colt Hypertherm


no good reason ok if your everlast there is

[dellwas]

Did your mama raise you to be an idiot, or does it come naturally?

the environmemt ? what a scam
Al Gore spends $11,000 a month on a electric bill just for
one of his houses. in tenn. and he tell me to ride a bike
is this what hyperthem thinks

[SEAR]

wtf? just when i think he cant really be this .... he confirms and ups the ante.
WoW

[Mick120]

Sundownlll hit the nail on the head.

[welds4d]

This thread is like a car wreck...I don't want to look, but I can't help myself...

[SundownIII]

Just a quick update,

Didn't think ol ed mac could make a bigger azz of himself than he did on this thread.

I was wrong. Ed (posting on millerwelds.com as BC Ironworks), showed what a total dork he is.:(

[kustomizingkid]

What an asshat.

[SEAR]

Just a quick update,

Didn't think ol ed mac could make a bigger azz of himself than he did on this thread.

I was wrong. Ed (posting on millerwelds.com as BC Ironworks), showed what a total dork he is.:(

:dizzy: so its worse over there ?

i don't really understand it. he makes all these posts, people help him and tell him how to post pics, find info, etc... all he does is respond to the negative comments and completely ignores the advice. doesn't return to the same thread and just starts a new one with the same bs.

my grandfather can figure out anything mechanical, plan & build houses.. etc.
when it comes to the internet, i have to show him 10 times how to do simple tasks and he still asks me how to do the same thing.
Thankfully, he does NOT know how to get involved in message boards :laugh:

[LarryO]

Just a quick update,

Didn't think ol ed mac could make a bigger azz of himself than he did on this thread.

I was wrong. Ed (posting on millerwelds.com as BC Ironworks), showed what a total dork he is.:(

I think ED might be starting to wear a tin foil hat like someone else did on this forum once. :dizzy:

He didn't deserve a Hypertherm for not even being able to spell their name correctly.