View Full Version : Foot pedal for a MM210?
03-07-2004, 06:20 AM
I am looking for a remote pedal switch for my mm210. Basically it is a remote switch to activate the gun when depressed. I would be using this for a rotary jig welding application. Anyone know if they offer one for my machine?
03-07-2004, 11:45 AM
I doubt Miller offers it, but why not get a foot switch and make your own? Thanks to ePay you should be able to accomplish the task for under $25-.
03-07-2004, 01:04 PM
I will, if I can't buy one pre made.
would you suggest I find an inline socket to go between the cord and the machine? Or hack into the existing cord? How Much power goes through the trigger?
03-07-2004, 01:58 PM
I would just add a connector in parallel with the original. The current is probably quite small. Any switch should work. :)
03-07-2004, 02:02 PM
Yes, it seems to be just two wires, pretty small guage. Would most Miller dealers carry the factory connector ends?
03-07-2004, 11:29 PM
Post the model & serial numbers, and I'll look at the diagrams on Miller's site for the answer.
The plug itself isn't unique to Miller.
03-07-2004, 11:48 PM
It is 1 year old.
03-08-2004, 12:20 AM
The manual says that when replacing a switch in the gun, polarity is not an issue, so all I need is an interupt switch. I just need to know how many amps it needs to carry.
03-08-2004, 12:51 AM
After looking at the schematic, all I'm seeing is a microswitch that triggers something on the PC board in the machine.
The switch in the gun is definitely a microswitch, and would have a max current capability of under 3 amps, though I doubt the relay or solid state device being triggered actually uses half an amp.
You could probably get by electricly with something like this
03-08-2004, 12:35 PM
Thanks a bunch Franz!
03-08-2004, 02:54 PM
I can pick this one up today.
Let me know if you think it won't work. I'll splice it into the gun using spade connectors, so I can remove it and return the gun to normal use.
03-08-2004, 05:12 PM
I'd be a little hesitant to use the RS pedal, especially since they really don't give any specs, to say nothing of the fact I've had to replace every damn thing I ever got from Radio shack.
In a welding environment you also probably want something that is metal and not plastic.
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.