Bob Warner
10-25-2006, 10:07 AM
Hello all,
The time has come for me to sell my surface grinder. I got this from a guy that owed me $1000 for helping him sell other equipment and I wanted the grinder. Well here I am without a job and needing cash so I am going to sell this.
It is a 1941 Norton Hydraulic Surface Grinder and came from a working shop. I have not been able to set it up in my shop. It still looks like it did when I got it meaning it needs cleaned up as it is covered in metal dust, lubricant, etc...
It has a 6X18 Brown and Sharp magnetic chuck.
It is a good machine, not sloppy anywhere, everything is tight, I just need the cash more and someday when I am back on my feet I will kick myself for selling this but the kids need to eat.
Looking to get $1000 for it but will entertain offers.
These are all the pictures I have because I don't have a camera. These were taken at the machine shop it came from.
http://www.warnerknives.com/CKD/IMG_0012.jpg
http://www.warnerknives.com/CKD/IMG_0013.jpg
I found it here on the web for $3150 (Cleaned up of course)
http://machinetoolsforsale.com/MachinePages/u_norton_6x18_sgrinder.htm
IF interested just shoot me an email and we can work it out.
The time has come for me to sell my surface grinder. I got this from a guy that owed me $1000 for helping him sell other equipment and I wanted the grinder. Well here I am without a job and needing cash so I am going to sell this.
It is a 1941 Norton Hydraulic Surface Grinder and came from a working shop. I have not been able to set it up in my shop. It still looks like it did when I got it meaning it needs cleaned up as it is covered in metal dust, lubricant, etc...
It has a 6X18 Brown and Sharp magnetic chuck.
It is a good machine, not sloppy anywhere, everything is tight, I just need the cash more and someday when I am back on my feet I will kick myself for selling this but the kids need to eat.
Looking to get $1000 for it but will entertain offers.
These are all the pictures I have because I don't have a camera. These were taken at the machine shop it came from.
http://www.warnerknives.com/CKD/IMG_0012.jpg
http://www.warnerknives.com/CKD/IMG_0013.jpg
I found it here on the web for $3150 (Cleaned up of course)
http://machinetoolsforsale.com/MachinePages/u_norton_6x18_sgrinder.htm
IF interested just shoot me an email and we can work it out.