sa-200 magneto

[bscott]

I'm working on an old sa-200 trying to get it running. It has a f-163 Continental engine and a Fairbanks Morse magneto. I think it was made in the late 50's. Does any one have an idea what the point gap should be? Or where to find out? Thanks!

[RobertDoubrava]

You can go to www.lincolnelectric.com and email Tech Support with the code and serial numbers off the welder and they can find the manual for you.

[BobC]

Here's a link to one of the manuals, info is on page 8.

Point gap is .020
Spark plug gap is .025

http://content.lincolnelectric.com/pdfs/products/navigator/OBSO_IMS/IM276B.pdf

Good luck!
Bob

[bscott]

Thanks, thats just what I needed. :waving:

[_CY_]

Here's a link to one of the manuals, info is on page 8.

Point gap is .020
Spark plug gap is .025

http://content.lincolnelectric.com/pdfs/products/navigator/OBSO_IMS/IM276B.pdf

Good luck!
Bob

bump for good info