PDA

View Full Version : Did some tidying up

Bob at WeldingMag
12-12-2006, 10:09 AM
All,
If you track the membership number at the bottom of the home page, you may notice that we've dumped about 700 members.
This action was taken as routine maintenance and part of the spam prevention effort. The 700 names that were removed consisted entirely of individuals who:
1. Have not logged on in the past 12 months;
2. Registered at least 12 months ago and never responded to the e-mail confirmation that is required to begin posting;
3. Had little or no activity after their initial registration date;
4. Have never posted a message on the site.

It's possible that we have inadvertently removed a few individuals who have business being here and who want to be here. I consider this chance remote, since -- again -- none of the registrants who were deleted have been active visitors in the past year. At the same time, if there is anyone who falls into this category, please feel free to re-register.

Thanks. Let me know if there are any questions.
denrep
12-12-2006, 05:37 PM
Thanks for all your efforts Bob! :waving:
You are appreciated!

One question; can you make it to the air bumper test?


NEVER Let oil come in contact with oxygen.
I will not start stupid threads.
Don't forget the upcoming air bumper test! :blob4:
Bob at WeldingMag
12-12-2006, 09:37 PM
Air bumper test?

Call me a wimp if you must, but I have a general policy about heading in the opposite direction when I know an explosion is about to take place.

When/where is it? I couldn't find it in the threads.
denrep
12-12-2006, 10:03 PM
Air bumper test?

Call me a wimp if you must, but I have a general policy about heading in the opposite direction when I know an explosion is about to take place.

When/where is it? I couldn't find it in the threads.

Here's a link.

http://www.weldingweb.com/showthread.php?t=7744&page=3

I’m on hiatus from starting new threads ’till the N.O. oil cools down, but I’ll keep you posted as the planning committee progresses. :p

Thanks again to you and all the others behind the scenes at WDF.


NEVER Let oil come in contact with oxygen.
I will not start stupid threads.
Don't forget the upcoming air bumper test! :blob4:
zapster
12-12-2006, 10:24 PM
good job Bob and staff

we all here appreciate it:waving:

this is the best site on the web as far as people and content rate:cool2:

i'll continue to contribute
and i'm sure everyone else here will also...

...zap!