1994 GMC 3500 with Lincoln SA 200 Surrounded by large alum tool boxes.
Truck is gas and propane with 6.4 L V8 loaded buckets and console no leather 380K Runs great. New parts include-2006-Tranny, alternator, waterpump. 2007 Tires, exhaust, tie rods, ball joints, battery. 2008- Front shocks. Truck has aftermarket stereo with sub and amp. Alcoa rims.
Skid has Large L shaped Aluminum tool boxes. Front driver side box- shelving and drop down for pipe roller storage. Rear Driver side - Great drawer set up and slide out wall for grinders and discs. Front Pass side One shelf oxy storage Beveler hanger acetylene storage. Rear pass one shelf split cabinet.Storage for 2 extra bottles and two 4ft drawers in the back behind large tailgate with 5"vise and pipe vice. Welder is also mounted on a roll out bead for eay access and maintenance. Rear winch to help with lifting. Machined Alum cable reels with 100 ft cable eacg OXY/Acetelene reel with 100 ft hose and 100ft of remote.
Welder Aprrox 1964 Lincoln SA 200. No Hour meter in those years sorry. The machine has $4000 in upgrades last year. Upgrades include carb kit,sediment filter, change over to distributor from magneto setup, so included in that are new plugs and wires fresh oil change. Conntinental engine did a full diagnostic on the machine and all recommendations were addressed. Machine runs tip top and has never let me down.
This would be a great truck for guys just starting out. Its ready to go with a fresh CVIP in January. Load your bottles and tools and away you go. Asking $24500 OR BEST OFFER
Please email me with any questions at email@example.com or view the at at www.kijiji.ca edmonton