SA 200 radiator hose part #
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 5 of 5
  1. #1
    Join Date
    May 2007
    Location
    Dallas, TX
    Posts
    349

    SA 200 radiator hose part #

    Anyone have the gates/dayco part number for the radiator hoses? I have a 1978 SA200. I would like to be able to go to any auto parts and buy the hose.

    Thanks in advance,
    Charles
    Millermatic Passport Plus
    Millermatic 200

    Millermatic 350P with Python
    XMT 304 /w S-64 feeder and 12RC
    Dynasty 300 DX
    Victor O/A
    Premier Power Welder for my trail junk.

  2. #2
    Join Date
    Feb 2007
    Location
    Idaho Falls
    Posts
    64

    Re: SA 200 radiator hose part #

    Upper hose: Gates 20606
    Lower hose: Gates 20705

    The proper hose is "in" those part numbers, that is you need to cut a bit off of each end. You can lay your old hose against the new one and mark/cut it or if you don't have the old ones just hold it up there and mark it. Better to have to cut it twice than go get another one ; )



    Copied from aws forums

  3. #3
    Join Date
    May 2007
    Location
    Dallas, TX
    Posts
    349

    Re: SA 200 radiator hose part #

    Quote Originally Posted by rmkrider1 View Post
    Upper hose: Gates 20606
    Lower hose: Gates 20705

    The proper hose is "in" those part numbers, that is you need to cut a bit off of each end. You can lay your old hose against the new one and mark/cut it or if you don't have the old ones just hold it up there and mark it. Better to have to cut it twice than go get another one ; )



    Copied from aws forums
    Thank you for the info.
    Millermatic Passport Plus
    Millermatic 200

    Millermatic 350P with Python
    XMT 304 /w S-64 feeder and 12RC
    Dynasty 300 DX
    Victor O/A
    Premier Power Welder for my trail junk.

  4. #4
    Join Date
    May 2007
    Location
    Dallas, TX
    Posts
    349

    Re: SA 200 radiator hose part #

    Anyone happen to have the part # for the bypass hose? This is the curved hose that is about 5/8" id.
    Millermatic Passport Plus
    Millermatic 200

    Millermatic 350P with Python
    XMT 304 /w S-64 feeder and 12RC
    Dynasty 300 DX
    Victor O/A
    Premier Power Welder for my trail junk.

  5. #5
    Join Date
    May 2007
    Location
    Dallas, TX
    Posts
    349

    Re: SA 200 radiator hose part #

    I found a Gates heater hose that worked. Had to cut about 1.5" on the long end.

    Gates part # 18955
    Attached Images Attached Images   
    Millermatic Passport Plus
    Millermatic 200

    Millermatic 350P with Python
    XMT 304 /w S-64 feeder and 12RC
    Dynasty 300 DX
    Victor O/A
    Premier Power Welder for my trail junk.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement