tig welding CUNI 6-g
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2009

    tig welding CUNI 6-g

    i need some advice concerning a possible test on the above, i can tig weld good but i never ran CUNI what is the standard root opening, also is there any color characteristic i should look for. i will be checking amps on scrap first.

  2. #2
    Join Date
    Nov 2005
    Santa Fe, NM

    Re: tig welding CUNI 6-g

    You'll probably want to provide more detailed information on the pipe size and schedule in order to get any meaningful feed back on this.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement