Scrap metal art or projects
RSS | Subscribe | Contact Us | Advertise | About Us
Page 1 of 25 12311 ... LastLast
Results 1 to 25 of 610
  1. #1
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Scrap metal art or projects

    A lot of the art or projects I make end up being made from scrap metal. I have lurked here for a while before joining and "borrowed" a few ideas. I thought it would be nice to return that favor and post items I have made so others can see them and borrow as well. Please feel to post any of your scrap art or projects.

    Trebuchet my son and I made when he was in middle school, he is an Army Officer now.
    Name:  1.jpg
Views: 12333
Size:  52.0 KB

    Dogwood branch made out of rebar found on a beach and metal from an electrical panel.
    Name:  large dogwood.jpg
Views: 12328
Size:  104.4 KB

    Variety of yard art items made from refrigerant tanks, coil springs and oil filters
    Name:  DSCF9290.jpg
Views: 12341
Size:  72.7 KBName:  R2D2 Yard Art Sculpture 2.jpg
Views: 12305
Size:  64.2 KBName:  DSCF9395.jpg
Views: 12301
Size:  82.2 KB
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  2. #2
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    I made this diving airlift out of 6" pipe. It was going to be used to excavate an area underwater.
    Name:  P1010666.jpg
Views: 12150
Size:  71.4 KB

    Roman Legionnaires Pilum or spear. My daughter and I made this for her college history class. She could make something or writer a paper. Made from the sheet metal skin of a dishwasher, old wheel barrow handle and piece of round bar I had.
    Name:  P1050603.jpg
Views: 12169
Size:  78.8 KBName:  pilum.jpg
Views: 12069
Size:  35.5 KB

    Guitar made from parts off old bicycles. Every part to include the strings are from old bicycles.
    Name:  Guitar 1.jpg
Views: 12096
Size:  27.1 KB

    DNA sculpture made from a piece of 2x8 metal stud. FedEx managed to destroy it during the shipment to a customer in New York City. I had to re-imburse the customer but FedEx paid me the full value
    Name:  DSCF8905.jpg
Views: 12049
Size:  45.3 KB
    Last edited by psacustomcreations; 09-14-2015 at 07:45 PM.
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  3. #3
    Join Date
    Mar 2008
    Location
    Georgetown, Texas
    Posts
    1,685

    Re: Scrap metal art or projects

    Making things from scrap makes the end results all the more sweet. Every thing looks gooid.

  4. #4
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    Wine rack made from part of an aluminum scuba tank
    Name:  DSCF9429.jpg
Views: 11825
Size:  35.6 KB

    Wine racks made from a portion of an oak tree that came down on my property
    Name:  DSCF9413.jpg
Views: 11823
Size:  41.9 KB

    Abstract sculpture made from a stick of aluminum 1" square tube
    Name:  DSCF9277.jpg
Views: 11787
Size:  28.7 KB

    Bookends made from a timing gear
    Name:  DSCF9231.jpg
Views: 11807
Size:  54.2 KBName:  DSCF9234.jpg
Views: 11828
Size:  63.2 KB
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  5. #5
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    Bookend from brake rotor.
    Name:  DSCF9235.jpg
Views: 11775
Size:  57.9 KB

    Mortar made from an old scuba tank
    Name:  scuba tank mortar 6.jpg
Views: 11768
Size:  79.5 KB

    Business card holders
    Name:  Industrial Business card holder.jpg
Views: 11765
Size:  50.0 KBName:  business card holders 1.jpg
Views: 11736
Size:  42.3 KB

    Pterodactyl made for customer. This was plasma cut by hand since I don't have a Torchmate or table
    Name:  Work completed by PSA Custom Creations.jpg
Views: 11720
Size:  85.1 KB
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  6. #6
    Join Date
    Dec 2004
    Location
    Alberta, Canada
    Posts
    2,350

    Re: Scrap metal art or projects

    A couple of mine from a few years ago

    Name:  Metal_Truck_misc_details_side_view.jpg
Views: 11749
Size:  43.9 KB

    Name:  working light 001 small.jpg
Views: 11714
Size:  22.2 KB

    Name:  eagle blued final 004.jpg
Views: 11699
Size:  98.5 KB


    The wire Z eventually got a big block transplant
    Name:  wire z sept 06 002.jpg
Views: 11681
Size:  132.4 KB
    If you don't want to stand behind our Troops, feel free to stand in front of them.

  7. #7
    Join Date
    Jul 2013
    Location
    La Porte, TX
    Posts
    3,782

    Re: Scrap metal art or projects

    I am always envious of those of you who have the talent to make such amazing pieces.
    Gravel

    The difference between theory and practice is that in theory there is no difference.

  8. #8
    Join Date
    Apr 2015
    Location
    SW, Minnesota
    Posts
    136

    Re: Scrap metal art or projects

    Very Nice! Thank You for sharing!

  9. #9
    Join Date
    Jul 2010
    Location
    Ogden, UT
    Posts
    302

    Re: Scrap metal art or projects

    This is a really cool thread. Keep it up

    Sent from my SCH-I535 using Tapatalk
    Andrew Whicker
    Blue Rider Design
    Email: Andrew@Blueriderdesigns.com
    IG: https://www.instagram.com/blueriderdesign/

    (Full time: Lead Design and Repair Engineer)

  10. #10
    Join Date
    Aug 2014
    Location
    baltimore
    Posts
    254

    Scrap metal art or projects

    Name:  ImageUploadedByTapatalk1442556679.330034.jpg
Views: 11356
Size:  30.2 KB

    I don't really like this enough to hang on the wall. It was My very first weld project. Lots of ugly and thick butt welds. I was going for some multi tiered thing with stand offs, maybe I'll add to it I don't know. Went back in the scrap pile.


    Sent from my iPhone using Tapatalk
    Last edited by Seawalker; 09-18-2015 at 02:20 AM.

  11. #11
    Join Date
    Apr 2014
    Location
    Illinois
    Posts
    2,036

    Re: Scrap metal art or projects

    psacustomcreations> particularly like the DNA sculpture. Nice work.
    --
    Wine bottles should be angled downward. I'm told we don't want our corks drying out. That being said, we don't drink but I do use wine for cooking and the few bottles I have on hand are stored standing upright and I've never noticed any problems.
    --
    Your Pterodactyl is awesome.
    --
    SWells> I'm pretty sure I've seen a photo of your eagle before. Spectacular!!! Absolutely spectacular.
    --
    Seawalker> That's a very good first project. Much better than mine. You should take that out of the scrap pile and find a prominent place to hang it.
    MM 211
    Smith Tru Lite O/A set, Thanks Bob!
    Lincoln AC-225
    --
    But you must not change one thing, one pebble, one grain of sand, until you know what good and evil will follow on that act. The world is in balance, in Equilibrium- Ursula K. Le Guin

  12. #12
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    Equilibrium, Thanks I had a thread in the machining section about trying to drill the holes in this. While I put these holes at about a 5 degree angle, it wasn't quite enough.

    Thanks to everyone for their posts. Please add more, there is some serious talent here and even if you may not think much of it, people like myself enjoy seeing others work so we can push ourselves to get better.

    A few more. These are made from slices cut off old scuba tanks

    Name:  Abstract scuba tank ring art 2.jpg
Views: 11219
Size:  19.0 KB

    Name:  P1020608.jpg
Views: 11202
Size:  44.7 KB

    Name:  scuba tank sculpture 5.jpg
Views: 11194
Size:  107.8 KB

    Made from scrap from other projects

    Name:  P1040801.jpg
Views: 11171
Size:  76.1 KB

    Name:  Ascendant.jpg
Views: 11167
Size:  80.7 KB
    Last edited by psacustomcreations; 09-18-2015 at 06:29 AM.
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  13. #13
    Join Date
    Apr 2014
    Location
    Illinois
    Posts
    2,036

    Re: Scrap metal art or projects

    I'm an entry level weldor and don't get to the machining threads... too advanced for me. I missed that thread. Was anyone in a position to offer a suggestion for correcting it? Just curious.
    --
    You've mentioned scuba tanks a few times. Presumably you have access to them. Did you see this thread, http://weldingweb.com/showthread.php...g-a-wind-chime ?
    --
    Really like the sculpture on the rock in the 3rd photo of your last post.
    --
    Say, you haven't by any chance fabricated anything other than a tool stand from a wheel rim have you? I've got quite a few rims stacked up in my upper driveway and have been racking my brain for ideas.
    MM 211
    Smith Tru Lite O/A set, Thanks Bob!
    Lincoln AC-225
    --
    But you must not change one thing, one pebble, one grain of sand, until you know what good and evil will follow on that act. The world is in balance, in Equilibrium- Ursula K. Le Guin

  14. #14
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    A man (Earl) and woman (Ida) figure made from rebar exposed during each of those hurricanes that hit the Virginia coast
    Name:  twisted rebar metal sculpture hurricane earl ida.jpg
Views: 11074
Size:  125.2 KB

    Abstract pieces made from left overs. The one made from squares won an award at the Fredericksburg, VA art show this year
    Name:  P1040809.jpg
Views: 11080
Size:  33.6 KBName:  P1050411.jpg
Views: 11013
Size:  20.4 KB

    More bookends
    Name:  Reader Sisyphus Book End 2.jpg
Views: 11004
Size:  38.6 KB

    Cut nail cross and two different types of wood
    Name:  P1050423.jpg
Views: 10959
Size:  25.9 KB
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  15. #15
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    Quote Originally Posted by Equilibrium View Post
    I'm an entry level weldor and don't get to the machining threads... too advanced for me. I missed that thread. Was anyone in a position to offer a suggestion for correcting it? Just curious.
    --
    You've mentioned scuba tanks a few times. Presumably you have access to them. Did you see this thread, http://weldingweb.com/showthread.php...g-a-wind-chime ?
    --
    Really like the sculpture on the rock in the 3rd photo of your last post.
    --
    Say, you haven't by any chance fabricated anything other than a tool stand from a wheel rim have you? I've got quite a few rims stacked up in my upper driveway and have been racking my brain for ideas.
    Thanks. I have sold over 100 bells so far so I will dig up some pics of the better looking bells and post them in that thread. I also made a video for Youtube showing the different sounds of steel versus aluminum bells and different strikers.

    As far as an idea for the rims, have you thought about burying them halfway and using them as the basis for a sea serpent humps?
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  16. #16
    Join Date
    Apr 2014
    Location
    Illinois
    Posts
    2,036

    Re: Scrap metal art or projects

    The stick man pushing the rock up the bookend is very creative.
    --
    While a sea serpent is a cute idea.... I don't know that burying rims half way in the lawn would work by me. I'd probably trip over them and break something walking around in the yard after dark. I'm thinking you must live where it doesn't snow or if it does.... you don't get any accumulations worth mentioning. By me, we can have drifts that are so high we can't see out our front windows. Combine that with a dog that can't be let out unless he's on a leash since he likes to supplement his diet with birds and squirrels and stray cats and I'm pretty sure that if I didn't break my leg running into them after dark during the warmer months..... I'd for sure run into any humps walking that dog in snow.
    --
    I hope you post some of your bell photos and your YouTube in that other thread on wind chimes.
    MM 211
    Smith Tru Lite O/A set, Thanks Bob!
    Lincoln AC-225
    --
    But you must not change one thing, one pebble, one grain of sand, until you know what good and evil will follow on that act. The world is in balance, in Equilibrium- Ursula K. Le Guin

  17. #17
    Join Date
    Oct 2012
    Posts
    411

    Re: Scrap metal art or projects

    Here's some flower vases I made from aircraft wing strut and plate. I wanted to combine textures when I designed them.
    Attached Images Attached Images    

  18. #18
    Join Date
    Jan 2011
    Location
    Phoenix Az.
    Posts
    527

    Re: Scrap metal art or projects

    Name:  Mondo small.jpg
Views: 11061
Size:  64.8 KB

    Just finished this one..

    5 foot tall by 5.5 wide.
    From the desk of Kevin Caron
    Trying to be the best me I can!
    www.kevincaron.com


    AHP Alpha Tig 200x
    MillerMatic 250
    Miller Syncrowave 200

  19. #19
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    Kevin, Thanks for posting. I have admired your work for years and watched a number of your videos.

    Equilibrium, I posted a few bells and a link to my bell video in that thread.

    Crabo, That piece looks really good and I like the way it changes as you rotate around it
    Last edited by psacustomcreations; 09-19-2015 at 05:34 PM.
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  20. #20
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    A few more items.

    This is a rose my son made when he was a freshman in high school. He used the metal from one of those Christmas cookie tins.
    Name:  Metal flower Rose 1.jpg
Views: 10797
Size:  48.5 KB

    Name:  Bike Sprocket Book End 1.jpg
Views: 10778
Size:  51.5 KBName:  flamingo 2.jpg
Views: 10787
Size:  101.2 KBName:  heron 2.jpg
Views: 10770
Size:  94.2 KBName:  metal stone kinetic balance orbit 4.jpg
Views: 10729
Size:  27.9 KB
    Last edited by psacustomcreations; 09-19-2015 at 05:25 PM.
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  21. #21
    Join Date
    May 2015
    Location
    Saunderstown, RI
    Posts
    534

    Re: Scrap metal art or projects

    These sculptures, a trike and gazebo, were made from scraps of 1/16" s.s. tig wire. All the wheels of the trike spin...

    Name:  IMG_7009.jpg
Views: 10647
Size:  27.7 KB

    Name:  IMG_7004.jpg
Views: 10616
Size:  32.3 KB

    Name:  IMG_7015.jpg
Views: 10578
Size:  30.6 KB

    Name:  IMG_7008.jpg
Views: 10552
Size:  21.4 KB

    Name:  IMG_7016.jpg
Views: 10545
Size:  23.4 KB

    Rich

  22. #22
    Join Date
    May 2015
    Location
    Saunderstown, RI
    Posts
    534

    Re: Scrap metal art or projects

    These aluminum sculptures were made entirely from weld metal, with no grinding. The filler rod used was given to me from an electrician who ripped some aluminum electrical cable out of a building. I cut and removed the plastic wire sheathing, and the inner wires were 1/8" rods. Perfect for these!!

    The first one is a tropical hut and a palm tree. The second one is a Mexican guy sleeping up against a cactus, while his donkey waits for him to wake up...

    Name:  IMG_3317.jpg
Views: 10574
Size:  46.7 KB

    Name:  IMG_3318.jpg
Views: 10560
Size:  38.4 KB

    Name:  IMG_3321.jpg
Views: 10565
Size:  50.7 KB

    Name:  IMG_3322.jpg
Views: 10533
Size:  47.9 KB

    Name:  IMG_3323.jpg
Views: 10540
Size:  45.0 KB

    Rich

  23. #23
    Join Date
    May 2015
    Location
    Saunderstown, RI
    Posts
    534

    Re: Scrap metal art or projects

    This one is also weld metal only. It was made with the same aluminum electrical wire as my other ones. I looked at my own hand, welded a little, looked at my hand some more, then welded some more, etc.

    Name:  IMG_3308.jpg
Views: 10638
Size:  42.6 KB

    Name:  IMG_3302.jpg
Views: 10459
Size:  38.2 KB

    Name:  IMG_3304.jpg
Views: 10418
Size:  35.3 KB

    Name:  IMG_3303.jpg
Views: 10414
Size:  37.6 KB

    Name:  IMG_3305.jpg
Views: 10390
Size:  38.8 KB

    Rich

  24. #24
    Join Date
    Oct 2012
    Posts
    411

    Re: Scrap metal art or projects

    That hand is awesome! 1/4 mile of wire in that one?

  25. #25
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    837

    Re: Scrap metal art or projects

    Steelsurgeon - Your work is great. Is that regular aluminum electrical wire? Do you have any idea what alloy it might be? I have a decent amount of it that is pretty heavy gauge but did not realize it could also be used as filler.
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement