Snap on bluepoint plasma cutter help
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2010
    Posts
    129

    Snap on bluepoint plasma cutter help

    A friend bought this plasma cutter and its isnt working. It looks like someone snipped something off the bottom corner of the circuit board. Does anyone know where to get a new circuit board or get a print of the board so I could replace whats missing? Im assuming it quit working and the last owner found a burnt resistor or something and cut it off to find a new one and gave up on fixing it. The machine is 115V and 25amp.
    Attached Images Attached Images     

  2. #2
    Join Date
    Oct 2010
    Location
    western kentucky
    Posts
    4,396

    Re: Snap on bluepoint plasma cutter help

    that plasma cutter is actually manufactured by Cebora....
    other model names include SNAP-ON YA-2225 MARQUETTE M12155 CENTURY 82021
    MATCO PCS21 PROARC 2500


    if you get it lined out heres a place that sells tips and stuff for it.. you might call them and ask if they do repair work or if they know of anyone,,,
    http://www.weldmart.com/SNAP%20ON%20...ING%20PAGE.htm

    they also sell an updated torch kit for it. if you get it repaired and decide to keep it i would do the torch upgrade, it turns it into a pilot arc plasma..



    you might try this place http://www.800abcweld.com/store/?crn...=1&action=show its the place thats listed on the front of your machine

    here is a link to a service manual http://www.800abcweld.com/pdf/plasma...ice_manual.pdf


    also, being since Lincoln Electric bought century you might try Lincoln.
    Last edited by brucer; 07-28-2011 at 07:33 AM.

  3. #3
    Join Date
    Oct 2010
    Location
    western kentucky
    Posts
    4,396

    Re: Snap on bluepoint plasma cutter help

    i done some digging, found this stuff.. from what i found on the internet parts are available.. let us know how it turns out..

    you have to use the century 82021 , marquette M12155 or matco PCS25 model numbers..

    i found this on Lincoln Electrics site
    http://www.lincolnelectric.com/asset...er%20Index.pdf

    service manual
    http://www.lincolnelectric.com/asset...5svcmanual.pdf

    parts list
    http://www.lincolnelectric.com/asset.../RPLM12155.pdf
    Last edited by brucer; 07-28-2011 at 07:53 AM.

  4. #4
    Join Date
    Mar 2010
    Posts
    129

    Re: Snap on bluepoint plasma cutter help

    Quote Originally Posted by brucer View Post
    i done some digging, found this stuff.. from what i found on the internet parts are available.. let us know how it turns out..

    you have to use the century 82021 , marquette M12155 or matco PCS25 model numbers..

    i found this on Lincoln Electrics site
    http://www.lincolnelectric.com/asset...er%20Index.pdf

    service manual
    http://www.lincolnelectric.com/asset...5svcmanual.pdf

    parts list
    http://www.lincolnelectric.com/asset.../RPLM12155.pdf

    That service manual has a schimatic of the circuit board but its different from this one. I appreciate the help, I think were getting a little closer to getting this going.

  5. #5
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    2,463

    Re: Snap on bluepoint plasma cutter help

    You call always try HTP America and a new place called Cebotechusa.com
    I have found both places very helpful.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement