Long time lurker, barely post. Having trouble with my Riland Plasma cutter /arc /Tig machine. Using it in PLasma mode I cannot make a cut. Haven't got my welding leads to check if it works with those. Bought it years ago and it has served me faithfully for 8 years or more. Recently I moved my shop and it sat unused for about 6 months. I plug it into my 220v outlet and switch it on, everything looks normal... until I step on the pedal. I get What I assume is an error code of 038, and little or no arc at the tip of the stinger. Though, I wonder if the display is reading output amperage. You have to look very closely to see it at all. I'm hoping someone else has had this issue, or even better, has a user manual for this machine lying around. I have been unable to locate mine... I'm open to suggestions. I have cleaned the cord connections at the machine, changed my consumables, even reset the air pressure. I'm kind of in a bind as I'm supposed to start working on a "Monument" for my parents now that my mother has passed. Purchasing a new machine is not an option right now... Looking forward to hearing from the group!