Fs: scratch start Tig torch with valve
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 13 of 13
  1. #1
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Fs: scratch start Tig torch with valve

    17 torch with gas valve
    35/50 dinse (1/2")
    5/8-18 side gas



    Name:  IMG_0015.jpg
Views: 461
Size:  82.3 KB



    $75
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

  2. #2
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Re: Fs: scratch start Tig torch with valve

    $65 can have it.
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

  3. #3
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Re: Fs: scratch start Tig torch with valve

    still have it
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

  4. #4
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Re: Fs: scratch start Tig torch with valve

    still have it
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

  5. #5

    Re: Fs: scratch start Tig torch with valve

    $65 shipped to 60408?

  6. #6
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Re: Fs: scratch start Tig torch with valve

    Pm me
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

  7. #7
    Join Date
    May 2017
    Posts
    52

    Re: Fs: scratch start Tig torch with valve

    What's the status on this torch Gamble? Also what amperage is it good for?

  8. #8
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Re: Fs: scratch start Tig torch with valve

    I sold this but i have more in stock with a black cable instead of red
    17 torch is good for 150amps
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

  9. #9
    Join Date
    May 2017
    Posts
    52

    Re: Fs: scratch start Tig torch with valve

    150 is too low for what i needed. Raspberries

  10. #10
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Re: Fs: scratch start Tig torch with valve

    Quote Originally Posted by Turbomunkey View Post
    150 is too low for what i needed. Raspberries
    You can use it higher it just gets hotter quicker.
    My 9 is rated for 125amps and I use it at 160.
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

  11. #11
    Join Date
    Oct 2015
    Location
    Aurora, CO
    Posts
    907

    Re: Fs: scratch start Tig torch with valve

    Just have to worry about melting the O ring on the backing cap when it gets too hot. But it'll be so hot that you'll get blisters on your hand from holding it even with gloves before that ever happens. I know from experience haha. But I was welding for about 3 hours almost constantly with a #9 torch at about 150 amps welding out a monster coupon that they mistakenly machined a 42 degree bevel on.

  12. #12
    Join Date
    May 2017
    Posts
    52

    Re: Fs: scratch start Tig torch with valve

    I have a machine that maxes at 275, so even with the "buffer" i would venture to say the torch is under rated.

  13. #13
    Join Date
    Feb 2009
    Location
    Chicago
    Posts
    6,214

    Re: Fs: scratch start Tig torch with valve

    Quote Originally Posted by Turbomunkey View Post
    I have a machine that maxes at 275, so even with the "buffer" i would venture to say the torch is under rated.
    The question is do you weld at 275 amps?
    The 26 torch is rated at 200. If you want more it's going to be water cooled
    Torchmate 2x2 CNC with Flashcut CNC controls
    Hypertherm Powermax45
    2015 AHP Tig
    Razorweld 195 Mig
    Razorweld 200ac/dc Tig
    ViperMig 180
    Razorweld, SSC Foot Pedal & MK Products & Atlas Positioner Dealer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement