Klutch 220Si Users Thread - Page 3
RSS | Subscribe | Contact Us | Advertise | About Us
Page 3 of 3 FirstFirst 123
Results 51 to 57 of 57
  1. #51
    Join Date
    Apr 2017
    Location
    Oklahoma
    Posts
    16

    Re: Klutch 220Si Users Thread

    I’m not sure what type of connector it is, probably would be easiest to move the stock plug to the new gun. Maybe someone else knows though.

  2. #52
    Join Date
    Apr 2017
    Location
    Oklahoma
    Posts
    16

    Re: Klutch 220Si Users Thread

    I see that a replacement gun solution above now, I didn’t see it before. But I was mainly wondering if there are any 250amp guns that will fit this machine?

  3. #53

    Re: Klutch 220Si Users Thread

    I am using to guns. One for aluminum only.

  4. #54

    Re: Klutch 220Si Users Thread

    Has anyone opened up the stock mig gun electrical connector? Looking from the inside of machine I see a red and blue wire. I was thinking I could tap into those wires with the other mig gun I have if I can’t find the correct plug.

  5. #55
    Join Date
    Apr 2017
    Location
    Oklahoma
    Posts
    16

    Re: Klutch 220Si Users Thread

    Oh I thought you just killed the stock gun, at one point I had a source for a connector that fit, I’ll dig around and see if I can locate it again.

  6. #56
    Join Date
    Apr 2017
    Location
    Oklahoma
    Posts
    16

    Re: Klutch 220Si Users Thread

    https://www.yoycart.com/Product/539888140998/

    The connector is a XS16JP5 so I would get the whole set

  7. #57
    Join Date
    Apr 2017
    Location
    Oklahoma
    Posts
    16

    Re: Klutch 220Si Users Thread

    Does anyone know if this mig gun will fit the 220si?
    http://www.airgas.com/product/Weldin...p/TWE1023-1101

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement