Partial sa200 restoration
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 9 of 9
  1. #1
    Join Date
    Aug 2016
    Posts
    30

    Partial sa200 restoration

    I have lost time to work on this anymore with me being back in school and its just been sitting around so I am looking to see if anyone would be interested in it for cheap so they can finish it and have a great welder themselves.

    Here is part of my thread.: http://weldingweb.com/showthread.php...00-restoration

    Then some info:

    -The motor has a fresh overhaul with 20 over pistons, new seals, crank bearings, connecting rods bearings, valves, etc.
    -The generator has been dipped and tested.
    -The starter is a brand new rebuild.
    -The alternator is a remanufactured brand new one.
    -All control board switches are new except the rheostat which tested good. There is a new low idle board. All wiring is brand new.
    - I have the radiator, hood, and two gas tanks but have not painted them so they are still rough. I will include them and I have a quart of the rustoleum smoke grey unopened or nearly full that I will include.
    - I still have the old intake manifold, distributor, armature, armature brash holders.

    Ive put a lot of time into this but don't have the time anymore it needs or interest.

    It should just need the rest of the body parts painted and installed, a new distributor, intake manifold, carb rebuild, brushes all around, and armature dipped. Everything has zero hours on it and I can turn the motor over for whomever is interested. Ill also include all receipts that I have but I may not have them all.

    Looking for $2500 but I want this gone so am open to offers (I may be asking too high).

    Name:  20171122_160803.jpg
Views: 347
Size:  69.2 KB

    Name:  20180309_135015.jpg
Views: 345
Size:  116.7 KB

  2. #2
    Join Date
    Mar 2009
    Posts
    3,239

    Re: Partial sa200 restoration

    Seems like a fair deal for someone. Most of the fun stuff you've already taken care of. Located in Canton, OH I assume ??
    "You can't out puke a buzzard"

  3. #3
    Join Date
    Aug 2016
    Posts
    30

    Re: Partial sa200 restoration

    Yes its located in canton, ohio 44709

  4. #4
    Join Date
    Nov 2012
    Location
    ROCKVILLE ,,VA
    Posts
    365

    Re: Partial sa200 restoration

    Please keep it!!! Your so closed to getting it finished!!! May one good weekend it could be done? And hit that starter button you be grateful !!! To hear it run!!

  5. #5
    Join Date
    Aug 2016
    Posts
    30

    Re: Partial sa200 restoration

    Bump. I am open to offers

  6. #6
    Join Date
    Oct 2016
    Location
    countryside of NY
    Posts
    193

    Re: Partial sa200 restoration

    Wishful you are closer.
    MM215
    Victor torch set

  7. #7
    Join Date
    Mar 2009
    Posts
    3,239

    Re: Partial sa200 restoration

    Quote Originally Posted by rorrerjp View Post
    Yes its located in canton, ohio 44709
    Drag it 18 hours southwest and she'll be gone by sundown.
    "You can't out puke a buzzard"

  8. #8
    Join Date
    Aug 2016
    Posts
    30

    Re: Partial sa200 restoration

    ^we just had a few small pipelines come through this area a few months ago. I should have listed it sooner but was adamant about letting it go.

  9. #9
    Join Date
    May 2008
    Location
    Orange, TX
    Posts
    16,528

    Re: Partial sa200 restoration

    Just under 19 hours and almost 1300 miles too far away.
    MM200 w/Spoolmatic 1
    Syncrowave 180SD
    Bobcat 225G Plus - LP/NG
    MUTT Suitcase Wirefeeder
    WC-1S/Spoolmatic 1
    HF-251D-1
    PakMaster 100XL
    '68 Red Face Code #6633 project
    Star Jet 21-110

    Save Second Base!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement