Power Cool W400?
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 5 of 5
  1. #1

    Power Cool W400?

    Anyone know the dimensions of this unit? Looks like it might be intended to mount under a welder. I've got a 255EXT and am going to buy a water cooler; be nice if the W400 would fit under it.

  2. #2
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    4,698

    Re: Power Cool W400?

    It will, but you will find that the cooler is a bit oversized for the unit. It is designed to nest under the larger units, such as the 350EXT.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  3. #3
    Join Date
    Mar 2017
    Location
    Forest Grove OR
    Posts
    221

    Re: Power Cool W400?

    I have the 350 EXT and use the smaller W300, it has been fine. The W400 wasn't available at the time. I've run my 20 water cooled torch at 260 amps and the torch never gets hot. The W300 is plenty of cooler for the job, though I'm happy so see they offer a bigger unit now, which I would have gotten if it were available last year.
    Everlast 350 EXT - Thermal Dynamics Cutmaster 52 - Rogue Fabrication M600 xHD tube bender
    Milwaukee 4208 Mag Drill - Shopmaster Eldorado Combo mill/lathe machine with DRO.

  4. #4
    Join Date
    Mar 2018
    Location
    Theresa, NY...Thats almost Canada!
    Posts
    15

    Re: Power Cool W400?

    Dimensions are roughly 30"L x 11"W x 10.5"H. The height is taking into account the feet and top stacking rails.

  5. #5

    Re: Power Cool W400?

    Seems to stack up just fine. (Had to move around the top and bottom standoffs though.)
    Name:  IMG_1072.jpg
Views: 76
Size:  103.0 KB
    Name:  IMG_1073.jpg
Views: 77
Size:  97.7 KB

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement