Flexible grinding wheels
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 12 of 12
  1. #1
    Join Date
    May 2014
    Location
    Missouri
    Posts
    339

    Flexible grinding wheels

    Have any of you used the flexible grinding wheels. I used the walter brand however a bit pricey imo, so they are out.
    I did come across the "green" flexible wheels but haven't tried them as of yet.
    I just don't like the hard wheels or grinding rocks, so I was just wondering if some of you had any feedback.


    Jim
    Jim,

    I don't mean to be argumentative and cantankerous,
    but I am getting older and a bit crotchety!

    Addendum; AND CRANKY

  2. #2
    Join Date
    Nov 2009
    Location
    Arizona
    Posts
    1,987

    Re: Flexible grinding wheels

    Hadn't really heard of them, do they come in 4.5"? Only saw 7" when I googled
    Miller Challenger 172
    Miller Thunderbolt AC/DC 225/150
    Miller Maxstar 150 STL
    Victor 100C
    Victor Journeyman
    Oxweld OA
    Harris O/A
    Smith O/A little torch

    No, that's not my car.

  3. #3
    Join Date
    Mar 2011
    Location
    Western Washington
    Posts
    141

    Re: Flexible grinding wheels

    Hadn't seen them before... but I see they been around for quite a while in a few different china brands of all sizes, guess I'll have to get one and see just how flexible it is and how good they work/last.

  4. #4
    Join Date
    Jun 2016
    Location
    Not there
    Posts
    1,591

    Re: Flexible grinding wheels

    I tend to agree with this lately.I've been leaning more and more this way. You still have to have flappers but for hawg'in.....

  5. #5
    Join Date
    May 2010
    Location
    Sparks, NV
    Posts
    9,234

    Re: Flexible grinding wheels

    These things?
    Tiger Sales: AHP Distributor www.tigersalesco.com
    AHP200x; AHP 160ST; MM350P, Spoolmatic 30A; Everlast PowerTig 185; ESAB 875 plasma;Evo 355. OA

  6. #6
    Join Date
    Mar 2018
    Location
    San Jose, CA Kelseyville, CA
    Posts
    183

    Re: Flexible grinding wheels

    That's interesting. I have some Pferd files, both triangle and round. They make good product, but comes from Germany...

    I suspect this are not cheap wheels. I know the Walters zip disc will flex just a tad...and then SNAP, $5 down the drain...these would eliminate that problem...

  7. #7
    Join Date
    May 2014
    Location
    Missouri
    Posts
    339

    Re: Flexible grinding wheels

    Those cut off wheels are pretty slick but that's not what I'm talking about.
    https://www.amazon.com/Flexible-Grin...ng+wheel&psc=1
    These are the chinese answer to the 3m version

    those flexible cut off wheels would probably be somewhat safer to use as well it would appear. What's the cost comparison?


    Jim
    Last edited by welditforyou; 04-09-2018 at 04:49 PM.
    Jim,

    I don't mean to be argumentative and cantankerous,
    but I am getting older and a bit crotchety!

    Addendum; AND CRANKY

  8. #8
    Join Date
    Oct 2007
    Location
    Vandalia, Ohio near Dayton
    Posts
    2,449

    Re: Flexible grinding wheels

    Pearl abrasives makes some flexible grinding and cutting disks for a 4.5" angle grinder. I liked the samples I got several years ago. Never found a local supplier to get them from and haven't found a need to mail order them in bulk. Still, a virtual tool in my bag of tricks that I keep handy for tough jobs.
    Benson's Mobile Welding at your worksite or place of business. Serving Dayton, Ohio and the surrounding metro areas.
    AWS Certified Welding Inspector (#XXX10731) and Certified Welding Educator (#XXX1008E)

  9. #9
    Join Date
    Jan 2011
    Posts
    42

    Re: Flexible grinding wheels

    Quote Originally Posted by A_DAB_will_do View Post
    Pearl abrasives makes some flexible grinding and cutting disks for a 4.5" angle grinder. I liked the samples I got several years ago. Never found a local supplier to get them from and haven't found a need to mail order them in bulk. Still, a virtual tool in my bag of tricks that I keep handy for tough jobs.
    What the hell is putting your CWI number up in your signature but leaving the first three numbers out about?

    Either your going to advertise it and let someone look you up or not.....

    Sorry for the derail
    American Welding Society - Certified Welding Inspector

  10. #10
    Join Date
    Aug 2004
    Location
    North Central Indiana
    Posts
    3,338

    Re: Flexible grinding wheels

    Quote Originally Posted by beags86 View Post
    What the hell is putting your CWI number up in your signature but leaving the first three numbers out about?

    Either your going to advertise it and let someone look you up or not.....

    Sorry for the derail
    It could be he is afraid someone will see and use his CWI identity for nefarious reasons. He's been a member here a long while, a very reliable an esteemed member of WW.

  11. #11
    Join Date
    Jan 2011
    Posts
    42

    Re: Flexible grinding wheels

    Quote Originally Posted by tackit View Post
    It could be he is afraid someone will see and use his CWI identity for nefarious reasons. He's been a member here a long while, a very reliable an esteemed member of WW.
    I know that's why don't advertise my number at all.
    I am not trying to bust his balls, i just don't understand.
    Nor did I say anything about his status on WW.
    American Welding Society - Certified Welding Inspector

  12. #12
    Join Date
    Mar 2011
    Location
    Bilbao, Spain
    Posts
    626

    Re: Flexible grinding wheels

    Quote Originally Posted by Bonzoo View Post
    I tend to agree with this lately.I've been leaning more and more this way. You still have to have flappers but for hawg'in.....
    The thing is that hard grinding wheels are not meant to be used on the flat. They are supposed to be applied to the material to be ground at 45 degrees or so. You are actually grinding with the edge of the wheel, not the flat. So the first comparison (abrasive disc VS hard wheel) is not fair at all. IMHO

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement