Miller Shop Cleanout
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 18 of 18
  1. #1
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Miller Shop Cleanout

    Time to move all my surplus Miller Stuff. These are all units that need repair and testing.
    Some of them may actually work once powered on, but I do not know. All details listed below on each machine.
    Asking price is $1500 obo for the entire lot.

    1. Millermatic 200 JA438731
    Appears complete, although the hood / wrapper is gone. Running gear wheels are shot. Internally unit looks pretty clean. Face is completely rubbed off.
    Attached Images Attached Images    
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  2. #2
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    2. Millermatic 35. JD717620
    Machine is complete minus gun, regulator etc. Needs new insulators off the front taps as previous owner got em warm. Wouldn't hurt to install a new contactor either. Missing both relays.
    Attached Images Attached Images    
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  3. #3
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    3. Miller Shopmaster 300 KB076936.
    Appears internally to be all there. No leads of any kind. Wraper is dented but complete.
    Attached Images Attached Images    
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  4. #4
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    4. Millermatic 251 LG3406798
    Appears to be complete inside. Has a chewed up mig gun and whip, and a so/so ground clamp. No regulator or hose.
    Broken front handle, wrapper is in good condition.
    Attached Images Attached Images    
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  5. #5
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    5. Millermatic LG3803878 MM251
    Missing internal circuit card. No leads of any sort. Wrapper in nice condition.
    Attached Images Attached Images    
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  6. #6
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    6.MB160269V 24A Wire Feeder

    Wirefeeder. Missing drive rolls and wire spool holder.. Appears to have been dropped at some point in its life as the hood is a little wonky. Appears to be all there internally.
    Attached Images Attached Images     
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  7. #7
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    7. KD576466 S-52E Wire Feeder

    Appears to have been dropped also as the hood is wonky. Missing gas solenoid off the back.
    Attached Images Attached Images    
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  8. #8
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    8. Millermatic 200 chassis. Good running gear and chassis. That's about all that's left on this old gal.

    9. Ox-Weld C39 CNC oxy torch. New old stock. Missing flame arrestors and tip.


    Again, most of these units do not have any leads. ALL of them DO NOT have power chords nor do they have gas regulators or hoses.
    All are sold where is, as is, no warranty. This would be a good investment for someone who has the time to make them into happy machines again.
    Heck, the two MM251's alone are work $800-1000 each when running.

    I need the room with winter coming. Get this stuff out of here.
    Attached Images Attached Images    
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  9. #9
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    Bump. Make offer
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  10. #10
    Join Date
    Jul 2012
    Location
    Kingsville,Texas
    Posts
    547

    Re: Miller Shop Cleanout

    Wish lived closer and would go check this out, have wanted a MM200 and Shopmaster.

  11. #11
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    Quote Originally Posted by guajilloweld03 View Post
    Wish lived closer and would go check this out, have wanted a MM200 and Shopmaster.

    Make a trip out of it. Free steak dinner and beer upon purchase.
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  12. #12
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    Make offer. Need gone.
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  13. #13
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    Bump to the top. Also open to trades
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  14. #14
    Join Date
    Oct 2010
    Location
    Indianapolis Indiana
    Posts
    1,120

    Re: Miller Shop Cleanout

    Bump to the top
    Miller Dynasty 200DX
    Miller Spectrum 250D
    Miller Millermatic 200
    Bunch of old blue dinosaurs....

  15. #15
    Join Date
    Nov 2014
    Posts
    295

    Re: Miller Shop Cleanout

    Got any cables? I need some 25' extender cables for a s22a wire feeder to put it on a boom.

  16. #16
    Join Date
    Jan 2008
    Location
    Lansing, MI
    Posts
    6,529

    Re: Miller Shop Cleanout

    Quote Originally Posted by Alabass View Post
    Got any cables? I need some 25' extender cables for a s22a wire feeder to put it on a boom.
    Does the feeder have remote voltage and readouts? If not, you only need a three conductor cable. The connectors are the most expensive part, but they’re relatively easy to make. Ebaysometimes has them cheap. The 24 volt base model cable is all you really need. You can get up to 75 ft away from the machine, after that you’ll start having voltage drop problems with the feeder.

  17. #17
    Join Date
    Nov 2014
    Posts
    295

    Re: Miller Shop Cleanout

    No remote voltage or read outs.


    Sent from my iPhone using Tapatalk

  18. #18
    Join Date
    Nov 2014
    Posts
    295

    Re: Miller Shop Cleanout

    Sounds like you could just splice in a longer piece of cable if you knew which three wires to use. What size wire does it need?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement