New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 24 of 24
  1. #1
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    4,768

    New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    We are proud to introduce the next generation of Power i-MIG welders, featuring synerically adjusted pulse mig welding. This unit is 250 amps of welding power with double pulse (pulse on pulse type) and single pulse MIG welding. This unit features programmed settings for pulse operation and allows for fine tuning of programs to suit the operator's requirements. This unit features both standard MIG and stick operation as well. In synergic mode, the unit is programmed for easy setup by simply selecting metal type, such as Cu Bronze or Stainless Steel. This unit will sell for 1899.00, much cheaper than most comparable models. But as part of a special introductory black Friday/Cybermonday promotion, this unit will be sold on preorder basis (in production now) for 1589.00. For those in autobody repair and fabrication, this unit is a especially great addition to your shop.

    Any questions, or if you'd like to purchase one at this price, be sure to contact us at 877 755 9353 ext 201 or 204.
    Attached Images Attached Images   
    Last edited by lugweld; 11-24-2017 at 01:43 PM.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  2. #2
    Join Date
    Nov 2017
    Posts
    50

    Re: New 2018 Power i-MIG 252DPi Synergic Pulse/Double Pulse MIG

    Very cool!

  3. #3
    Join Date
    Dec 2015
    Posts
    1,943

    Re: New 2018 Power i-MIG 252DPi Synergic Pulse/Double Pulse MIG

    Yeah,

    This is brilliant. I mean, I don't really have use for MIG right now, but have often thought that if I did that the Pulsed-251Si-Multi might be the unit for me. But I think I like this one better, since I've already got an Advanced AC/DC TIG unit, and have no need for extraneous torches, etc. This one is single and double-pulse too. Wheeee!!!!!!!

    ROCK ON, Everlast!

    PS: Mark, what's the 4T "SPCL" add as a sequencer?
    Last edited by C. Livingstone; 11-24-2017 at 12:16 PM.
    Peace to you all,
    Christian Livingstone

    www.youtube.com/newjerusalemtimes

    Everlast 210EXT AC/DC (2015)
    CAT250D 200 amp DC TIG/Stick/Plasma

  4. #4
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    4,768

    Re: New 2018 Power i-MIG 252DPi Synergic Pulse/Double Pulse MIG

    I think it is a special setup/manual mode.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  5. #5
    Join Date
    Mar 2014
    Posts
    557

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Dang, I wish you guys would quit with the 'NEW'! I'd like to get at least a couple years before I get teased by a new unit...

  6. #6
    Join Date
    Nov 2017
    Posts
    50

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    I can't wait to see the specs on this one!

  7. #7
    Join Date
    Jul 2016
    Location
    Midwest
    Posts
    224

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Love to run this machine. Very familiar with the technology. this will be a big deal for Everlast. 4 wheel drive feed system??
    Last edited by Rondo; 11-25-2017 at 10:32 AM.

  8. #8
    Join Date
    Dec 2015
    Posts
    1,943

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    I'm guessing that it will undoubtedly have a the 4-roll drive.

    I mean, I believe the 251Si initially had a 2-roll drive, but was quickly updated to the 4-roll drive. And even the new iMIG 230i has the 4-roll drive.

    So, that 4-roll drive seems to be standard on any Everlast MIG unit beyond the iMIG 210.

    Look at that big door on the side too, which probably holds up to 33 or 44 lb wire spools.
    Last edited by C. Livingstone; 11-25-2017 at 11:59 AM.
    Peace to you all,
    Christian Livingstone

    www.youtube.com/newjerusalemtimes

    Everlast 210EXT AC/DC (2015)
    CAT250D 200 amp DC TIG/Stick/Plasma

  9. #9
    Join Date
    Jul 2016
    Location
    Midwest
    Posts
    224

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Push Pull to complete the pkg. Wondering if the End light on the panel is crater fill? Or a ramp down voltage ?

  10. #10
    Join Date
    Dec 2015
    Posts
    1,943

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Gee,

    Push-Pull is more advanced and costly than I'd ever want to get, I'm sure.

    I too wondered if that "SPCL" 4T sequencer has to do with an adjustable amount of ramp-down, as a crater fill feature.
    Peace to you all,
    Christian Livingstone

    www.youtube.com/newjerusalemtimes

    Everlast 210EXT AC/DC (2015)
    CAT250D 200 amp DC TIG/Stick/Plasma

  11. #11
    Join Date
    Nov 2017
    Posts
    50

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Lugweld, more info please!

  12. #12

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Lugweld, these haven’t been added to the website yet. Is there any chance of getting a copy of the manual for those if us that have already ordered one?

  13. #13
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    4,768

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    No. Not yet.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  14. #14
    Join Date
    Mar 2010
    Location
    A-town KY
    Posts
    269

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    send me 1 ill try it LOL
    Current welder
    Hobart Handler 187
    Everlast PowerUltra 206Pi

    Dead welders
    HF 151 dual mig
    Craftsman Welder 20511
    Craftsman Welder 80amp Flux

    I killed them LOL!!!!

  15. #15
    Join Date
    Dec 2015
    Posts
    1,943

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Yeah,

    Has the first batch of these and the 252STi units arrived to your West Coast warehouse yet?
    Peace to you all,
    Christian Livingstone

    www.youtube.com/newjerusalemtimes

    Everlast 210EXT AC/DC (2015)
    CAT250D 200 amp DC TIG/Stick/Plasma

  16. #16
    Join Date
    Oct 2016
    Location
    USA
    Posts
    100

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    4 roll has been standard for a while now

  17. #17

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    When I ordered mine a few weeks ago, I was told it would ship in January.

    I hope he meant January of 2018

  18. #18
    Join Date
    Dec 2015
    Posts
    1,943

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Allright,

    We've got a early-adopter in this thread!

    Please do give some feedback within this thread about how you like the unit and the single and double-pulse features.


    Quote Originally Posted by 3LFarms View Post
    When I ordered mine a few weeks ago, I was told it would ship in January.

    I hope he meant January of 2018
    Peace to you all,
    Christian Livingstone

    www.youtube.com/newjerusalemtimes

    Everlast 210EXT AC/DC (2015)
    CAT250D 200 amp DC TIG/Stick/Plasma

  19. #19

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Sure thing. I’ve got fresh bottles of 75/25, 90/10, and CO2 as well as spools of 70S2 and dualshield wires to try out when it gets here.
    I’ve only ever used .023 and 75/25 in my little Lincoln. I’m not sure what double pulse means, but the ability to pulse spray transfer sounds like the hot ticket for welding heavy, out of position stuff.

    $1589 shipped to my door was too good to pass up for a full feature mig welder and inverter stick welder. Should be the perfect machine on the farm.
    Last edited by 3LFarms; 01-09-2018 at 08:36 PM. Reason: Added post script

  20. #20
    Join Date
    Sep 2017
    Location
    Upstate, NY
    Posts
    17

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    If its the same as the 252's, shipping mid to end of January...unless it gets pushed back further. Hopefully the boat will get here soon. Like 3L, I have gas and wire and sticks waiting for my 252 to get here. Heck I have even sharpened all the tungstens from my Arc-Zone variety pack....

  21. #21
    Join Date
    Dec 2017
    Location
    massachusetts
    Posts
    4

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    I’m looking forward to when this unit comes out.


    Sent from my iPhone using Tapatalk

  22. #22
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    4,768

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    It will be soon, but I don't have any delivery dates available yet. I am sure some are coming in soon, but as is the case, sometimes the factory shipment is broken up differently than planned due to space requirements in the containers and the actual product can show up later than planned as an additional container is required and ships a day or two later.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  23. #23
    Join Date
    Dec 2017
    Location
    massachusetts
    Posts
    4

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    Has anyone received their welder yet?


    Sent from my iPhone using Tapatalk

  24. #24

    Re: New 2018 Power i-MIG 253DPi Synergic Pulse/Double Pulse MIG

    No. I was told it would ship in January. If I don’t have a shipping (in transit) notice by February, then I’ll call and pester them.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement