Hobart Handler 140 FS in Central Iowa
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2011
    Posts
    87

    Hobart Handler 140 FS in Central Iowa

    New 11-2-2016 I still have the Warranty Card, book, box it came in and the receipt. I used on Gas with solid wire now setup for flux core. Went to a larger welder, the only reason for selling. Gas regulator and hose included of course and the large spool adapter of course. You need a good 20 amp 120 volt circuit to run at the full output. Comes with one extra tip for .030 same as new welder has and 2 part rolls of wire. One flux core the other solid for gas. Price for all of the above $375 Cash, no checks of any kind. Yes you can try before you buy.

    Extras, a full 1 lb roll of .035 flux core wire, extra New nozzle, 2 new .035 and maybe whatever is in the picture 6 or so extra .030 tips.... add on $10. For a total of $385 Cash.

    Reply to this Post or PM me.
    Attached Images Attached Images    
    Retired - Refrigeration Pipefitter - Master Electrician- Iowa
    Lots of Hobbys

  2. #2
    Join Date
    Jun 2011
    Posts
    87

    Re: Hobart Handler 140 FS in Central Iowa

    SOLD Locally
    Retired - Refrigeration Pipefitter - Master Electrician- Iowa
    Lots of Hobbys

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement