|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
08-19-2010, 01:50 PM
|
|||
|
|||
|
Little homemade tool for the bandsaw
Well I finally picked up a NT 4x6 saw on sale the other day. Went through it and cleaned it all up, set the tracking. I have to remake the top pulley adjusting plate because mine was bent but managed to get it to track almost 100% straight. on a 2" cut top to bottom, it's off by 1/16" at the bottom. Ran out of time today to play with it until later. But, I made a small tool to keep on the side of it to made adjusting the vice and other nuts a bit easier. I hate having to look around for commonly used tools, so I sacrificed some chicom sockets to the might bandsaw gods.
 http://i693.photobucket.com/albums/v...p/IMG_0468.jpg 14 and 17mm sockets welded to some bent 1/2" stock. Washer at the top to attach a chain to the machine so I don't lose the damn thing. Edit, made the last picture a link until I can resize it
__________________
Miller: 200dx, Bobcat 225, Passport, Powermax 45, Milwaukee: Dry Saw, MagDrill, grinders 
|
|
#3
08-19-2010, 04:33 PM
|
||||
|
||||
|
Re: Little homemade tool for the bandsaw
Great idea!
__________________
(Retired) Professional firefighter, amateur everything else I try to do... Oh yeah: Go Big Red! (You know: one of the 12 members of the Big 10 cuz we left the 10 members of the Big 12...) 
|
|
#5
08-19-2010, 09:39 PM
|
|||
|
|||
|
Re: Little homemade tool for the bandsaw
Made on for my chopsaw also.
|
|
#6
08-19-2010, 09:59 PM
|
||||
|
||||
|
Re: Little homemade tool for the bandsaw
Great idea,but may I suggest using string instead of chain. If it some how gets caught and/or wrapped around you hand, you can jerk away and break the string, possibly avoiding messing up your nice new band saw with blood and tissue. Don't want that to happen
 Goes for the drill press key too! 
__________________
200amp Air Liquide MIG, Hypertherm Plasma, Harris torches, Optrel helmet, Makita angle grinders, Pre-China Delta chop saw and belt sander, Miller leathers, shop made jigs etc, North- welders backpack.
|
|
#7
08-20-2010, 06:57 AM
|
|||
|
|||
|
Re: Little homemade tool for the bandsaw
That's a very good idea. I'm going to run to HD and buy a small carribiner to attach it to the machine since it fits my chopsaw as well. Glad you guys like the idea.
Itsadam, Firezapper had you posted something similar in the past?
__________________
Miller: 200dx, Bobcat 225, Passport, Powermax 45, Milwaukee: Dry Saw, MagDrill, grinders
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Hybrid Mode
|
|
All times are GMT -4. The time now is 10:32 AM.
