|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Orange right angle drill attachment - junk!
Bought it to drill holes in studs to run electrial wire.
It was good for about 2 holes. Then it leaked oil and almost fell apart. Clrealy wasn't worth anything. |
|
#2
|
|||
|
|||
|
Re: Orange right angle drill attachment - junk!
Hi
i purchased one from them, but is all metal. Havent used yet but if i have any problems will let you know. I did attachet to drill to try, and seem to run fine. for what it worth gean: |
|
#3
|
|||
|
|||
|
Re: Orange right angle drill attachment - junk!
Hi Gean:
The metal will probably make a big difference.... |
|
#4
|
||||
|
||||
|
Re: Orange right angle drill attachment - junk!
The HF adapter is no where near beefy enough for drilling very many studs, especially with "spade" type hole boring bits. I bought one for when I need to drill a hole or drive a screw in the occasional tight place.
__________________
Hobart 140 Handler w/ gas HyperTherm Powermax 380 Plasma oxy/acetylene |
|
#5
|
|||
|
|||
|
Re: Orange right angle drill attachment - junk!
i got the close quater drill for $34.99 about 2 weeks ago works great very happy with it i have to install 400 window guards i think it should last
|
|
#6
|
|||
|
|||
|
Re: Orange right angle drill attachment - junk!
i got the metal one and use it to drill holes in metal,wood ect it works fine i was looking at the orange one and figured it wouldnt last long (plastic)
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|