|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Optrel Satellite troubles
While using my Optrel Satellite mask yesterday it began to malfunction where the shade would flicker light and then dark. It didn't get to the point where it was too bright to be concerned about flash, but it was annoying as hell. I tried cleaning the sensors and worked the variable adjustment and sensitivity knobs back and forth for a few moments in case they were dirty.
I'm concerned this (expensive when purchased) mask is on its way out...has anyone encountered and solved these issues before?
__________________
Thermal Arc Fabricator 210 1970 Lincoln Redface Miller 150 STL Still need a Syncrowave and a plasma and a milling machine and a lathe and a bigger shop and a.... My other addictive hobby; http://frozenpixels.smugmug.com/ |
|
#2
|
|||
|
|||
|
Re: Optrel Satellite troubles
Try a setting in the sun, or under a floodlight for a a while,when it acts up.. Might be a low or weak battery.
__________________
Esab 1600 Powercut Esab Caddy 200 Lincoln LN-25 Pro Thermal 400 MST/ Lincoln LF-72 Thermal Ultrafeed 1000 Thermal 186 AC/DC Thermal Pee-wee 85s Thermal Scout 170 Tweco pull gun Smith Torches 5X10 Plasma Table Edwards 65 Ton |
|
#3
|
||||
|
||||
|
Re: Optrel Satellite troubles
Ditto what X said.
I've got as Esab Eye-Tech 9/13 (made by Optrel) that needs "re-charged" by the sun when not in use for a day or two. I'm afraid it's on it's way out. I wonder if Optrel has the same warranty that SpeedGlas does, where if it's out of warranty they'll give you a "healthy" trade-in allowance?
__________________
Trailblazer 250 Esab Caddy 160 Thermal Arc 201TS well, I tried real hard to bite my tongue and not get involved.... |
|
#4
|
|||
|
|||
|
Re: Optrel Satellite troubles
I had one same problems, so i fixed it with a miller digital elite.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|