CNC Plasma Table

[BryanDowdy]

This is our 3rd table to build. It is built very sturdy and performs very well. It utilizes many things found on high end system costing over 15K. We built this table to sell, it has a couple of hours of use on it.

Pictures & Videos: https://picasaweb.google.com/1053800...79/April232012

Our website: NorthridgeFab.com

Email: NorthridgeFab (at) gmail (dot) com

Phone: 970.626.sixty ninety

Spec's:

Cut Area: 48x60

Table Size: 55x65

Gantry Parking area

30mm linear bearing slide on X & Y axises

15mm linear bearing slides on Z axis

Advanced Height Control w/Floating Head

Tall clearance gantry for cutting SQ tubing, Channel, I-Beams, Etc.

Dual side drive gantry

6" deep water table.

Curved slats

Rack & Pinion drives

3:1 reduction on X & Y axises via timing belts/pulleys

5 Start Z axis acme screw

All motors are Hybrid 620oz steppers w/Gecko Drives

CandCNC Controls w/custom Mach3 Screens

Dell Desktop

SheetCAM

Mach3 (Already calibrated to table)

The plasma cutter and torch are not included in the price. If your interested in them, contact us.

We are located in western Colorado. Pickup is welcome or we can deliver the machine any where in the US for 1.25-1.65 per loaded mile depending on distance.

8950.00 obo