this is one nice welder

[aslippy]

i have had this lincoln dc-400 with lf 72 wire feed for 20 mouth and i love it i had a miller 450 with a MIGRunner™ Package did not weld as good as the lincoln i did not thank so

[aslippy]

front

[JC'sWelding]

Nice looking machine. I have always been partial to Miller though (Go Blue!). But I sure like that Ellis band saw in the back. Hmm... Where did you say you live, and when are you going on vacation?

[aslippy]

vacation what is that Ellis band saw

[denrep]

Originally Posted by aslippy

i have had this lincoln dc-400...

With stick leads too!

You do need a vacation, maybe JC and I will pitch in for your flight.

[paweldor]

I almost bought one of those Ellis saws a few years back. They're slick the way user angles the whole saw head for miter cuts, and the material stays in place. I'm envious. But since retirement I'll stick with my old Wells and my Dayton I have set up on a 45.

Nice looking shop,

[aslippy]

i need to take a day and clean it is starting to look like a pig pin

[JC'sWelding]

At least spend a day and re-wire your shop so you don't have to run 220v extension cords across the floor.

[El_Lloydeo]

we have an ellis exactly like that and its a nice little saw. and i dont know how similar your machine is to a cv400 but i used a cv400 for several years and my goodness what a great machine it was. i wouldnt know what to do without running those 220 extension cords across the floor!

[Pookie]

It is the wrong color.

[El_Lloydeo]

no im pretty sure its the right color.......right color for me! im racist when it comes to welders!

[i4sillypwr]

Those feeders nest so bad running big cored wire. Ugh I bet I've run 500+ rolls of 1/16 dual shield through one of those things running off a dc600. Used to drive me Effing nuts. Get wire cleaners and lube asap if you dont run them already.