|
#2
10-29-2009, 06:13 PM
|
||||
|
||||
|
Re: 6gr
I have certified over 2,000 6GR welders with .045 E71T1/C-25. 8" Schedule 160 Pipe, with a flat cut, welded to an 8" schedule 80 with a 33 Degree Bevel, with a nickel Nose and a 3/32 Root opening. 200 Amps and 26 Volts. Positioned in a 45 degree angle with the 180 pipe up. Root (up), fill (up) and 3 down caps. Only 2 could not pass. 6 weeks course. I will look for the WPS, but above is the same, just fill in the blanks. John Gault
__________________
SMAW,GMAW,FCAW,GTAW,SAW,PAC/PAW/OFC and Shielding Gases. There all here.  : 
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -4. The time now is 08:23 AM.
