|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-07-2011, 09:13 AM
|
||||
|
||||
|
Need: Wire rollers 0.025 for Miller
I need a set of wire feed rollers in order to run 0.025 wire. I have a Millermatic 210 that I will be using this with but may be using my xmt350 and s64 wire feeded so if you have 4 rollers, that would be even better!
Please let me know what you have. I need these sooner rather than later. Please call me or email me. Thanks, Grant 636 485 5745 grant@jackalopefab.com
__________________
http://jackalopefab.com/ MM210 Synchrowave 200DX Miller XMT350 w/60series feeder Miller Bobcat 250 with SGA 100 and spoolgun HTP Plasma Full Machine shop with everything 
|
|
#2
03-08-2011, 08:37 PM
|
||||
|
||||
|
Re: Need: Wire rollers 0.025 for Miller
Anyone have a set?
__________________
http://jackalopefab.com/ MM210 Synchrowave 200DX Miller XMT350 w/60series feeder Miller Bobcat 250 with SGA 100 and spoolgun HTP Plasma Full Machine shop with everything
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
All times are GMT -4. The time now is 04:42 AM.
