stainless but weld no filler 14 gauge at 80 amps

[Ron Padilla]

havent been doing much lately so I grabbed a few coupons and melted them together next I need to get may hands on 16 guage tube. hit me what you think. this is 14 gauge done at 80 amps with no filler check both sides.

[tnjind]

I see you have been to the Miller site.......

[David R]

Try a lap using some of the base as filler.

Looks pretty good, needs less heat.

Do it again!

David

[Ron Padilla]

i have more so going to do the laps, i have been to the miller site along rig weider, and a few others

[tnjind]

Originally Posted by Ron Padilla

i have more so going to do the laps, i have been to the miller site along rig weider, and a few others

I see the tig for dummies book from Miller, I have one too.

[Ron Padilla]

the one in the photo is daily spanish for dummies, the tig book is out in the garage, I read anything I can get my hands on

[Mikel_24]

Never used a tig torch but I could help you out with your Spanish... LOL.

That fusion weld looks good to me. As soon as I get a bottle of pure argon I will give TIG a try (already have everything else).

Mikel

[Ron Padilla]

Thanks for the offer to help with spanish, if you wanted to you could pick up 3 one way tickets to your location I could help you tig and you could help me with spanish just let me know when to get ready.