PDA

View Full Version : linde power supply hda 200



eyepoppin customs
04-09-2008, 10:41 PM
i need some help. just got this tig welder fired up and would like to find a manual. the welder wont give a pilot arc, and the only way i can get an arc is to touch the tungsten to the work piece. also when was this thing made. here are some picts if they will help.
thanx to anyone that can help.
18568

18569

18570

18571

18572

Jolly Roger
04-20-2008, 10:53 PM
Try going through the archive at ESAB. That's your best bet, but not all of the Linde stuff is available.

BKahler
07-21-2008, 09:23 PM
eyepoppin,


Did you ever find a manual for your welder? I have the exact same welder and would sure like to have one.

Thanks!

Brad

weldgault
07-21-2008, 10:28 PM
ESABNA.com should have this information or call their TD. John

weldersales
07-21-2008, 10:36 PM
From a thread a year ago:
When you see that 'band' across front of machine, it means it was built for Linde by another company. The HDA300 was built by P&H HARNISHFEGER and was quite a good machine. Hard to find the foot control for it, but it looks like it is there in first picture. This is an industrial 300 amp ac/dc tig welder. Used one in my garage for years. Darn near bullet proof. There was one more model after this, the C300, before Linde built their own in Florence, SC.
The 200 amp version was the HDA200. We can get the 300 manual, not sure about the 200 but the two machines are essentially the same. weldersales

weldersales
07-21-2008, 10:38 PM
Looks like that serial number starts with 'B66' . Pretty sure that means 1966 and that would be about right. weldersales

eyepoppin customs
07-21-2008, 11:01 PM
i have a manual that i got from http://www.arcproducts.com/ and if you need it i would be happy to email it to you Brad. :D

weldersales did you get the info on the parts i asked you about in the p.m. i sent you if so did you find any thing out on the high freak capacitor and the phase shift rheostat. i would relay like to get my high freak working a little better.:help:

MIP
08-04-2009, 01:32 AM
helllo, i need the manual can you help me please im searching for almost one year, or if you have a electric draw is better for me


Thanks!

MIP
08-04-2009, 01:33 AM
helllo, i need the manual can you help me please im searching for almost one year, or if you have a electric draw is better for me


my mail fabiansisimo@hotmail.com

Thanks!

jameswswanson
04-08-2010, 04:33 PM
http://www.esabna.com/literature/Archive/Manual/F11-300%20-%20F11-699/F-11-412-D_HDA-200_ANDhDA-300_POWER_SUPPLIES.pdf

jameswswanson
04-10-2010, 02:05 PM
I need help. I'm looking for a Foot pedal for a Linde HDA 200. The part number is 131B21 or something compadable.

Thanks, Jim

eyepoppin customs
01-13-2013, 01:40 PM
Haven't been on here in awhile but I'm looking for a phase shift Rheostat for my hda 200...... or if anyone knows where I can have mine Repaired????? let me know