PDA

View Full Version : Any old Hobart boards?



rpmmillwright
05-29-2009, 01:32 PM
Hello All,
I am looking for a voltage regulator board for our old hobart GCC-510. It was a common board at the time. Ours exploded somehow when someone was messing with the machine. I have everything but that board up and working again. The part # is 355894A-2
If anyone has or knows of one let me know please.
Rick

mudbugone
05-29-2009, 02:29 PM
You might want to explore the Hobart site http://www.hobartwelders.com/weldtalk/ If it can be found or perhaps repaired someone might have some information that helps.

When looking for that kind of stuff,you can't contact too many sites for help...Good Luck.

rpmmillwright
05-29-2009, 03:09 PM
Been there allready a member. In fact that is how I was referanced to this board. Thanks

metalworker
05-29-2009, 11:26 PM
Also you can try on http://welderzone.com

lars66
05-30-2009, 08:42 AM
Weldmart might have some parts or C&M at 419-584=0008.

duaneb55
05-30-2009, 10:24 AM
Check with the fine folks at Arc Products http://www.arc-products.com/. Ask for Josh.

zapster
05-30-2009, 11:50 AM
Check post #8...
I have been to his place...
This guy will have it no problem..

http://weldingweb.com/showthread.php?t=14868&highlight=polarity+switch

...zap!

LarryO
06-14-2009, 01:00 AM
.........