PDA

View Full Version : power mig 215



99blackzr2
06-30-2006, 12:17 PM
what do you guys think of the power mig 215.bought it yesterday.how thick of metal can you weld with it? how good is it with aluminum.after i turn the gas off should it hold pressure for awhile.

Gearhead
06-30-2006, 03:28 PM
I have a 215, welds great with no problems to mention. I also have a Millermatic 200. The old Miller welds smoother than the Lincolin 215 but the Lincolin has a more stable arc.

Tailshaft56
07-01-2006, 01:08 AM
what do you guys think of the power mig 215.bought it yesterday.how thick of metal can you weld with it? how good is it with aluminum.after i turn the gas off should it hold pressure for awhile. If it hold pressure great, That's as good as it gets. Yes it should hold pressure for a few minutes. If it bleeds down rapidly I would star looking for the leak as you are wasting gas.

99blackzr2
07-01-2006, 09:34 AM
If it hold pressure great, That's as good as it gets. Yes it should hold pressure for a few minutes. If it bleeds down rapidly I would star looking for the leak as you are wasting gas. there was a leak found it thanks.