PDA

View Full Version : Cheap, easy and a little silly torch holder



KMA
11-05-2016, 04:40 PM
My cheap, magnetic HF torch holder wasn't very good at holding my mig gun, so I decided to modify it using a leftover flag pole mount I had lying around. I notched out the flag holder, loosened the magnetic based, slid it in, and re-tightened. After these pics were snapped, I put the original part of the holder into a vice and straightened out a little so it would work better with my tig torch.

Nothing too exciting, but I thought I'd share. :)

http://uploads.tapatalk-cdn.com/20161105/29f499fcc7bfe5d9c253f614e7a344db.jpg
http://uploads.tapatalk-cdn.com/20161105/5eb5b15d487a0c69257a96e5e015f974.jpg

zipzit
11-07-2016, 01:22 PM
Nicely done! Here's my holder using scrap stuff. The clamp is a ground used for attaching ground wires to large girders. Wire was bent on a Harbor Freight bender.

1543981

Here's a view showing the ground clamp.

1543991

mike837go
11-07-2016, 05:24 PM
Uhhh....

Thanks for sharing?