PDA

View Full Version : Glen Tig 302 (old one)



Dunerocket
01-25-2007, 12:00 AM
Hello everyone


I have a Glenn Tig 302 machine and it's an old one still works good. I would like to find a foot control for it. Does anyone kown anything about this machine or if the miller RFC-23a foot control would work on this machine?



Thanks
Don T
las Vegas

smithboy
01-25-2007, 09:19 AM
I don't know that machine, but let's start with a question. How many conductors does the control connector have? If it's 5, the RFC-23a can almost certianly be made to connect and work to some extent, but then you have to worry about the resistance of the slide dohicky in the pedal. There is another glenn welder on ebay right now...not yours but it looks like it's using the rfc-23a connectors for its remote.

Dunerocket
01-25-2007, 09:34 AM
Thanks for the reply.

It has 2 conductors for the start and 3 for the remote current control that would be 5 total in 2 seprate plugs. I was trying to bid on that one it's just like the one I have. Does the welder resistance need to match the foot pedel resistance?


Thanks