WeldingWeb - Welding Community for pros and enthusiasts banner
Cancel
Create thread New Forums

Who makes the best Portable welding table ?

Jump to Latest
21 - 40 of 42 Posts
#21 ·
I dont want to come off like a DICK! But damn it Man were freaking welders/weldors! We make ****! Just make what you think fits the project and then you make adjustments later.
 
Save
Reply Quote Like Like
#22 ·
welding1 said:
I dont want to come off like a DICK! But damn it Man were freaking welders/weldors! We make ****! Just make what you think fits the project and then you make adjustments later.
Click to expand...
Absolutely. Do-overs and modifications are a sign of an active mind. Anything less puts us in the “good enough” category.


Sent from my iPad using Tapatalk
 
#24 ·
welding1 said:
I dont want to come off like a DICK! But damn it Man were freaking welders/weldors! We make ****! Just make what you think fits the project and then you make adjustments later.
Click to expand...
Yup. Some of these folding tables must be made of gold.
 
Save
Reply Quote Like Like
#25 ·
The Klutch table that I showed is selling for $82.99 from Northern tool, it looks reasonably well made for light duty work. I often use an old black&decker workmate because I got it for free, and it really is light, sturdy, and very handy. My Ridgid "Tristand pipe vise" cost me over $350 and I think they list for over $500 now. Here's the miller version of the folding weld table:

This one might be made from gold, because the list price at Grainger is like $470 !!!!

There are often times when it make sense to make your own, and other times your better off buying off the shelf and modifying. Knowing which usually comes from experience. I can say that at times I have gone overboard making a fixture/worktable , and my boss will ask "Are you making a master piece , I just need those brackets done today, c'mon."

"A good man always knows his limitations."

Whatever you buy, let us know how you like it.

Regards
 
Save
Reply Quote Like Like
#28 ·
welding1 said:
were freaking welders/weldors! We make ****!
Click to expand...
Sure sounds good until you consider the variables. This assumes that you have the tools, skills and materials to simply whip something together. Just going to town to find some 1/4" plate might set you back more than one of the cheap-o tables being talked about here. When you start thinking about building a "decent" table that's worth building and will last you years.... you could be out hundreds just in materials, never mind your time.

What would it take to make a scissor-lift welding table like I mentioned? Sure, you could knock out a stiff-legged stand pretty easily, but they you have something that's only good as a table and not for raising or lowering your work so you can better access the point of weld, and you can't also use it to help lifting heavy stuff around the homestead.

Tweaking a pre-existing design, like the hydraulic carts, makes sense. A day's work to make a stiffer top, pop some holes in the plate for clamps, and you're ready to go. But starting from scratch?
 
#29 ·
For some time I used to use one of these Harbor Freight rolling service carts:

https://www.harborfreight.com/16-inch-x-30-inch-steel-service-cart-5107.html

I clamped a piece of 1/4" plate on top. It was a few inches bigger than the cart all around for clamping work at the edges.

Easy to wheel outside or wherever you want it in the shop. Not so good for puting in a vehicle

I put a few fire bricks in one end and slid the plate to the side for OA cutting and heating.

It's nice to be able put clamps etc. in the bottom tray too.

Kirk
 
#31 ·
I have one of these to use in the factory for welding. Its good because you can put the welder, or plasma cutter underneath, and use the top with piece of plate as a welding surface using the sides of the cart to catch most of the sparks. They aren't too heavy either, and will easily fit into a pick up , van , or SUV.

The only problem is they tend to collect stuff when left in a shop.

Unlike this...........

Nice table Jon, but at 4FT x 8FT and Half a Ton (1300 Lbs) doesn't seem very portable. I think the $4900 might also be over the budget of the OP, who was waffling on spending $800 for a portable stick welder. But hey , you never know, it is a nice looking table.
 
Save
Reply Quote Like Like
#32 ·
albrightree said:
I have one of these to use in the factory for welding. Its good because you can put the welder, or plasma cutter underneath, and use the top with piece of plate as a welding surface using the sides of the cart to catch most of the sparks. They aren't too heavy either, and will easily fit into a pick up , van , or SUV.

View attachment 1727081

.
Click to expand...
I like the cart idea.

A piece of 1/4" plate with hardwood or ABS location "tabs" on the underside's corner would make it easier to transport and converted back to a cart when not needed for welding.

Perhaps a two or 3 inch overhang would be nice to accommodate clamping.

Also add 2 inch vertical receiver for vise (or)?

Image


Image



Sent from my iPhone using Tapatalk
 
#33 ·
And if you do go the tool cart route Vaughn T’s suggestion for mods could be easily and economically applied.

Here’s a pic of a cart I extended the wheelbase on and added a heavier axle...

Image


Image




Sent from my iPad using Tapatalk
 
#34 ·
https://www.powerbench.com/ The wife bought me one of these ror an early christmas present a couple of years ago at a farmshow, I was drooling but wouldn't spend the money. She disappeared later and when we left it was in the truck. Very handy and well made. I did have an Idea yesterday for the shooters, I have a shooting table forget the brand, but a chair with foldable legs that disassembles for transport, With a thicker top, should make a dandy one for tedious stuff.
 
#36 ·
Scaffolding casters are glorious if you want an easy rolling table, cart etc as they pivot, lock so they don't pivot, have large wheels, and have wheel brakes. They're only about 100 bucks for four leaving plenty of cash for clean steel.
 
#37 ·
I hope have found a table.

There is one thing about a table I found is weight is very helpful.
A small table needs to around 150 to 250 pounds so use a hammer and part does not bounce.
The folding tables are just to light for most jobs. Try a table on wheels.

Dave

Jonath108 said:
Hi everyone,
I have been looking online for a portable welding table. Seems they run from $69.99 for HF to over $229. for other brands. I know I will need to replace any cheap hardware. Weight is a concern, so closer to 50 lbs with rollers will work.
Any advice and opinions greatly appreciated.
Thanks in advance.
Click to expand...
 
#38 ·
albrightree said:
The Klutch table that I showed is selling for $82.99 from Northern tool, it looks reasonably well made for light duty work. I often use an old black&decker workmate because I got it for free, and it really is light, sturdy, and very handy. My Ridgid "Tristand pipe vise" cost me over $350 and I think they list for over $500 now. Here's the miller version of the folding weld table:

View attachment 1727017

This one might be made from gold, because the list price at Grainger is like $470 !!!!

There are often times when it make sense to make your own, and other times your better off buying off the shelf and modifying. Knowing which usually comes from experience. I can say that at times I have gone overboard making a fixture/worktable , and my boss will ask "Are you making a master piece , I just need those brackets done today, c'mon."

"A good man always knows his limitations."

Whatever you buy, let us know how you like it.

Regards
Click to expand...
I have this same table that i bought 10 years ago. I love it and it has worked out perfectly for me in my little shop. Granted, I didn't that kind of money for it.
 
#40 ·
I have an old table I made years ago for work out in the strippins. Its 2ftx3ft or pretty close to that,it has 3" angle iron legs with some 3 or 4inch straps wrapped around it and some angle iron running between the legs and the top plate was 3/8". Im not quite sure of the exact measurements of the angle iron stuff anymore, I built this thing about 1989 or so and right now Im too damn tired to run out to the barn and measure it all up. I made it about 2 foot or so high so I could set on a bucket or a small chair and work like a civilized ol miner. Back in the day my bony *** was pretty stout and I would pick it up and toss it in the back of the weld rig. I used to do teeth, tooth bases and hitches, drag chains, crowsfeet, and other small stuff on top of it. Some of that stuff was pretty damn heavy...pick up a hitch for a 13 yard dragilne bucket sometime you wish had a chain fall or a crane. I had a 20 yard bucket rolled upside down I used for a weld shop welded a few eyes up in the floor and hooked a chain fall I bought and did the deed like that after the first hitch I did. Any way that table never blinked when I was usin it. Just a thought if you wanna go that route it is somewhat portable with a bit of muscle
 
21 - 40 of 42 Posts
About this Discussion
41 Replies
24 Participants
Last post:
shasti
WeldingWeb - Welding Community for pros and enthusiasts
posts
1.8M
members
82K
Since
2003
Community Forum for Welding Professionals and Enthusiasts To Interact and Learn - Free
Full Forum Listing
Explore Our Forums
Welding Projects & Pictures General Welding Questions MIG, TIG, Stick, And Oxy/Fuel Welding Machines - Tools and Cutting Methods Lincoln