You can not BEAT this Welding RIG but you can BUY IT.
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 24 of 24
  1. #1

    You can not BEAT this Welding RIG but you can BUY IT.

    Journeyman Welding RIG Truck, Welding RIG Trailer, w/sleeper/camper, "Business for SALE"
    1 Welding Rig Truck for Sale w/2 MORPHING trailers which drive "Over The Road As One (1) Trailer".!!!!
    = 1, Welding RIG Truck, + 1 Welding RIG Trailer, + 1, Sleeper Camper Trailer, w/ both Trailers "JOIN-ABLE.
    WATCH the Video and you won't believe your eyes.!!!

    Pete's Welding Inc. http://peteswelding.com/Call me at (248)-802-8565 or Email me pete@peteswelding.com
    Way TOOooooo Much to describe in writing,, So I Made A VIDEO;
    To watch a 20 minute YouTube Video of;, "Mobile Welding Truck for Sale"
    [ame="http://www.youtube.com/watch?v=NL7VVgbAmps"]http://www.youtube.com/watch?v=NL7VVgbAmps[/ame]
    NOTICE;
    This Welding RIG Business is Currently, Actively, "Open For Business" (located in Michigan 48043)
    and will continue to be "Open For Business", until the day that it is "SOLD".

    Lock Stock and Barrel to "One buyer"

    ? Are You ? A Good ? Fully Certified Welder ? (arc,mig,tig) ?
    Immediately charge up to $100.00 per hour, for YOUR Welding labor !!
    Comes with Existing, (Your Name Here) .com Welding Website
    You get existing welding business "Phone Number" (with terms)
    ~ PLUS ~ Referrals to my past, current, and future CUSTOMERS.
    Up to One Week of my time for orientation, training, repairs Etc.
    ~ "a Turn Key Operation" ~ "A Going Concern"


    100 feet away from the truck, @ 250 amps,,, @ 10,500watts YOU can,,,
    ~ Arc weld, AC, & DC straight and reverse polaritys,
    ~ ArcAir cutting. ON BOARD COMPRESSED AIR SYSTEM Powers air TOOLS, HORN, rear suspension AIRBAGS, etc..
    ~ TIG weld stainless steel and aluminum,
    ~ MIG weld steel at 212 amps
    ~ MIG weld Aluminum at 212 amps (plus an aditional 70 feet length on the aluminum spool gun LEAD)
    ~ POWER additional 240volts at 40amps. PLUS 3 aditional 110volt at 20 amps Hand Tools


    ~ You Get ~
    Gently Used Truck; REBATE
    100 % of the Total $dollar$ amount required to fix anything needed to pass this Welding Truck's "Current Annual 2013 DOT Inspection" by the GMC Truck Dealership, Will be, 100 % Rebated off the Total Purchase Price, Up to a Maximum of $5,000.00 off of the $50,000.00 Price,

    "You Receive Your Welding Rig Truck, AFTER the GMC shop says it's, A-ok,

    Or,,, BUY IT NOW for $45,000.00 = As is, Where is, NO Warrantee Expressed nor Implied.

    Cash and Carry = 45K Buys Everything, "Lock Stock and Barrel"

    1996 GMC 3500 Sierra, 1 Ton+ (454ci./7.4 liters) Gasoline engine,
    6 speed auto transmission. Utility tool boxes, Anti-lock brakes.
    Galvanized 4 door Crew Cab, w/ Very limited amount of rust on CAB and doors, & easily Repair-able.
    4 wheel drive, Shift on the fly. Dual rear wheels

    I bought this Fleet Truck Utility Vehicle from the Alliance Energy Gas Co. in Wisconsin. The Alliance Energy Gas Co. has a Policy of, (Re-build before Re-sale), So, they Completely Rebuilt the Engine, Drive train, Rear-end, & Front Suspension, when the Truck had #114,000 original miles on it, in 2006, prior to the sale of the Truck to me.

    Currently, in JANUARY /2013 the truck has #169,000 original miles.
    I am the only other owner and I have never had any accident with this Truck.
    Repair Services performed by Ed Rinke Chevy/Buick/GMC Centerline Mi. include;
    New in 2010 ~~ NEW, radiator, power steering box+ pump, transmission cooler, fuel pump, front end parts. Etc. Plus 100% new BRAKES system in 2010
    Other improvements include;
    ~ New rear leaf springs in 2010 + extra leaf springs + rear axle Airbag lifters.
    ~ Tires on truck and both trailers are all "80% Good Rubber"
    ~ 12,000 lb/6 ton Winch on front of truck, 100 feet long X 3/8" steel cable

    Sleeper / Camper / Trailer;
    !! "A Collector's Item" !! The ONLY ONE of its kind ever made. !!
    by;, Micro-Lite Trailers in Illinois.
    Visit Micro-lite's Website; microlitetrailer.com
    2010 Model, Bought NEW in Sept. 2009 ~~ Real Clean !!
    This "SEMI" camper trailer is truly THE ONLY "ONE, (1)" that Micro-Lite ever made.
    (a Vymeron w/ the back 1/2 Cut-off / converted into a SEMI/flat-bed Toy Hauler)
    This (1) person Camper has Heat, Air conditioner, Refridgerator, Microwave.2 burner electric stove, kitchen sink w/ 10 gallon potable water w/ 12volt sink spigot pump, porta-pottie, storage compartments, exhaust fan, 12votl lights inside and out etc. too much to say.!! .

    PETE'S WELDING then Fabricated the Mechanism to allow the Camper trailer and Welding Box trailer, to, "MORPH together", to drive OTR, (over the road), "AS ONE TRAILER .
    Note; the Morphing aspects of these two trailers, in its entirety, was solely conceived of, designed and fabricated, by Pete's Welding Inc. in 2010.

    This (2 MORPHING Trailer combination), IS the only ONE of its kind in the entire WORLD.

    Trailer / Welding box;
    This trailer was a smashed U-haul mini cube box TRUCK.
    I converted it into a Welding Utility Box Trailer with a new 2,500 pound axle, Electric brakes.
    ~ The Box slides forwards and backwards over the Axle, on rollers, on H-beam Tracks,
    powered by a 'garage door opener', to facilitate the Joining and Dis-joining of the two trailers.

    Lincoln Welder/Generator Ranger 250 Ac/Dc GXT;
    GXT is Lincoln's "Top of the line"
    GXT is the ONLY Lincoln Welder Generator with AC/ or ALTERNATING CURRENT.
    GXT is the ONLY Lincoln Welder Generator with ALUMINUM Tig / Heli-Arc Welding
    This Welder can't be found 'For Sale USED' and has Increased in value since purchase.
    Well maintained machine by; AirGas Welding Supply. I've treated it like it was my own.

    ~ Lincoln Ranger 250 GXT ac/dc Welder/Generator 10,500 Watts continuous power for 100% Duty Cycle Welding and/or 1/unit of 240 volt machine PLUS 4/units of 110 volt grinder type power tools. Weld and run machines and tools ALL at once, @ 100% duty cycle
    ~ "was bought NEW in 02/2006" ~ (1340 hours on motor in 09/2012) ~ 'gently used'
    ~ 2pcs. Of 50' lengths, of, 1/2 inch copper arc leads, in a "Spring loaded Redi-reel spool".
    ~ Plus, 2pcs. Of 50' lengths, of, 1/2 inch copper arc leads, "un-attached, loose on hooks".
    ~ w/ 6 pcs of male/female heavy duty "Arc Lead Quick Couplers".
    ~ w/good heavy duty ground clamp & Stinger
    ~ Arc-Air Cutter attachment

    Lincoln Tig/Heli-arc Welder
    ~ Tig module 300amp Order# K930-2
    ~ PTA-26 tig torch Order# K1783-4
    ~ Hand Amptrol Order # K963-2
    ~ 2 units of; 45ft. Tig Module Control Cable extensions Order # K937-45

    MillerMatic 212 Mig Welder
    ~ Millermatic 212 Auto-Set Mig Welder
    ~ Migmatic M-25 Gun
    ~ 2 units of; Millermatic 30A Aluminum Spoolguns
    ~ Millermatic spool gun 45' ft extension cord
    ~ 110 volt resistance Handheld Spot Welder ~ (spot weld 16ga. sheet metal and less)
    ~ 110 Volt PLASTIC Welding Kit ~ (welds different types of plastic w/ solder-like gun ).

    Oxy-Acetylene tanks regulators hoses torches
    ~ acetylene tank Private Owner size
    ~ oxygen tank Private Owner size
    ~ argon tank for tig and aluminum mig welding Private Owner size
    ~ argon/co/2 tank for welding steel mig Private Owner size
    ~ HIGH Pressure Argon tank, transfer hose, 6 ft. long. "Special order".
    ~ 2 used oxygen regulators, 2 used acetylene regulators, 4 used argon / Co2 regulators
    ~ plus 150 linear feet of oxy/acet hoses
    ~ 2, acetylene torches, 1, medium and 1, big
    ~ 1, Lastek Powdered Metal Spray oxy/acetylene torch
    ~ 1, oxy/acetylene Spring loaded Redi-reel hose, roll up spool


    Misc, used tools and equipment
    Valued as GOOD well maintained USED.

    ~ 110 volt air compressor, powered by Lincoln Ranger generator
    ~ air system on truck,; air lines, LOUD air horn, 5000lb rear airbag suspension, + wiring
    ~ 2pcs 1/2" drive air ratchets, 1 pc needle de-scaler, 1pc air sander, 1 air chisel gun w/bits
    ~ air powered Riveter Gun ~
    ~ 14" electric cut off saw ~
    ~1 pc. Makita Saber Saw ~
    ~ 1, Milwaukie saws-all saw ~
    ~1 pc. Makita Saws-all Saw ~
    ~ circular wood saw
    ~ hand grinder 9" heavy
    ~ hand grinders x 2 pcs 4 1/2 small
    ~ hand belt sander 1" X 21" belt
    ~ hand roto-zip w/ attachments w/small assortment of bits
    ~ big, old work horse 1/2" chuck , arm breaker, drill
    ~ small 1/2"chuck 1/2"hp drill press
    ~ hundreds of drill bits taps misc etc.
    ~ hundreds of pounds of misc hand tools
    ~ ladder rack with 18' extension ladder
    ~ Etc.

    Find Youtube Video link above, and Click on it to Watch Video of Truck and Trailers.
    Please .

    Call me, Pete, # 248-802-8565

  2. #2
    Join Date
    Aug 2012
    Location
    Colchester, UK
    Posts
    1,226

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Now if i had a rig like that i'd be on the road 24/7, You could practically go from job to job, pay no rent and live each week as if it was going to be your last, What a great way to be, shame i'm living in the wrong country


  3. #3
    Join Date
    Feb 2008
    Location
    North of Philly
    Posts
    20,241

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Quote Originally Posted by Gerry1964 View Post
    Now if i had a rig like that i'd be on the road 24/7, You could practically go from job to job, pay no rent and live each week as if it was going to be your last, What a great way to be, shame i'm living in the wrong country
    Well you could move Gerry... You'd at least have a place to stay if you bought that. It won't take you too long to learn to drive on the right side of the road.
    .



    No government ever voluntarily reduces itself in size. Government programs, once launched, never disappear. Actually, a government bureau is the nearest thing to eternal life we'll ever see on this earth!

    Ronald Reagan

  4. #4
    Join Date
    Aug 2012
    Location
    Colchester, UK
    Posts
    1,226

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Quote Originally Posted by DSW View Post
    It won't take you too long to learn to drive on the right side of the road.
    NO !!! its you Guys are driving the wrong side, can't you see that?? Plus why do you all let the passengers drive??


  5. #5
    Join Date
    Jul 2011
    Location
    Queens, NY
    Posts
    574

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    I have no intention of buying, but I couldn't help but watch the whole video. That's some rig you set up there.
    IW Local 580 NY, NY

  6. #6
    Join Date
    May 2010
    Location
    Sparks, NV
    Posts
    9,674
    Zero tongue weight on the second trailer would be a real issue though. Also ther is going to be a lot of drag from that 3rd set of wheels so far back
    Tiger Sales: AHP Distributor www.tigersalesco.com
    AHP200x; AHP 160ST; MM350P, Spoolmatic 30A; Everlast PowerTig 185; Thermal Dynamics 60i plasma.
    For Sale: Cobra Mig 250 w/ Push-pull gun. Lincoln Wirematic 250

  7. #7
    Join Date
    Jan 2013
    Location
    Everett, WA
    Posts
    104

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Holy cow, you're not just a welder with an awesome truck, you're a freekin' JEDI! at 3:34 you sucked that bolt right up into your hand with your mind!

    Seriously though, that's a slick rig, I'mma go buy a lotto ticket!

  8. #8
    Join Date
    Feb 2011
    Posts
    75

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Damn cool rig!!!!

  9. #9
    Join Date
    Sep 2009
    Location
    western ks
    Posts
    293

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    talk about everything you would ever need ! i however think Lincoln made a ''bigger badder'' welder gen though[6:40] !
    MM 251
    MM 135
    Lincoln Pro cut 55
    Bobcat 250
    Miller Thunderbolt ac/dc
    older ac forney
    Jackson nexgen 3n1
    3-Smith OP setups
    97 Dodge diesel
    Makita chopsaw
    Jet swivel head bandsaw
    lincoln tig 300/300
    30a spoolgun
    puma port. gas air comp.

  10. #10
    Join Date
    Sep 2006
    Location
    Marlborough, The Peoples Republik of MA
    Posts
    3,559

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    I would say that too, but that was the only Lincoln engine drive that you could run AC TIG off of.
    Disclaimer; "I am just an a$$hole welder, don't take it personally ."

  11. #11
    Join Date
    Sep 2012
    Location
    Knoxville, TN
    Posts
    859

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    You have a beautiful system, and I'm really impressed with what you've done with the truck!

  12. #12
    Join Date
    Jan 2006
    Posts
    1,900

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Now that is a dream rig if I ever saw it. at first I was Ehh... but then when you opened it up I thought This guy is a genius. Talk about using every bit of usable space and well thought out.

    southpaw, the tongue has zero tongue weight when he moves the trailer back over its axle. when it is connected the trailer is moved forward so the axle is sitting at its rear instead of its center. as far as the drag on the tires, i can see your point, but that is minor in comparison to what you have. work trailer, sleeper, and work truck.

    I love seeing this kind of engineering. I hope you sell it. you have more there than meets the eye.

  13. #13
    Join Date
    Jun 2008
    Location
    The Cove
    Posts
    273

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    All that thought and work he put in to it, Why sell?
    American by birth Southern by the Grace of God

  14. #14
    Join Date
    Sep 2012
    Location
    Knoxville, TN
    Posts
    859

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Quote Originally Posted by 74fencer View Post
    All that thought and work he put in to it, Why sell?
    In the video, he says he has health issues and needs to get out of the business.

  15. #15
    Join Date
    Jun 2008
    Location
    The Cove
    Posts
    273

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Good Ear, I missed that on the Video. Thanks for the reply
    American by birth Southern by the Grace of God

  16. #16

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Wow,
    Quite a big response.
    I'm sorry I didn't reply sooner but I DID reply sooner,,
    and my wifi burped and I lost it all.
    so I'm back, to try again.

    To answer some ??'s posed in this thread

    1, tongue weight.
    picture this,, the RIG truck, the camper trailer, and the RIG trailer, all positioned in line,,
    on a perfectly flat floor, all disconected from each other,, free standing.
    NOW,,,

    When the rear trailer docks with the front trailer,,
    the rear trailer PICKS UP the back of the front trailer by more than 1 inch.
    THEN the two trailers sit JOINED,,, FREE Standing,, Perfectly LEVEL.
    with no trailer jack needed,,
    with ZERO toungue weight at the FRONT of the JOINED trailers.

    So the BACK trailer that APPEARS to be RIDING on the BACK of the Front trailer,
    is actually Picking UP,, and CARRYing the back of the front trailer.

    Got that?.,,,,
    THEN,,,
    When I do jack up the Front, of the "TWO JOINed trailers,,,,,
    to Pindle Hook them to the RIG TRUCK,,,,,
    that,,, picks up the Front Camper trailer axles, EVEN MORE in the front axle area,,
    as well as being picked up in the back area.,,

    THERE-by,,,, taking almost all of the weight OFF of the Two Front Trailer axles.
    Putting that weight, ALL onto the REAR Single Axle at the Back of the two Joined trailer Units.

    Got that?.,,,,
    But WAIT,,, there's even MORE
    BECAUSE thennnnnnnn,
    When I add Air to the rear AIR SUSPENSION of the truck axle and
    LIFT UP THE BACK OF THE TRUCK BY AT LEAST 4 inches,,
    THAT even MORE lifts up the two front trailer axles,,,
    (almost completely Off of the GROUND ).
    AND EVEN MORE-so,, puts that weight on the BACK trailer AXLE.

    Resulting in the SMOOTHest / STRAIGHTEST ride you ever could imagine.!!!
    Towing Forward = Smooth bullet. = 70mph = take hands off of steering wheel for two miles.

    Put a full cup of coffee on the rear bumper of the truck,, & one on the top of the tool boxes,,
    Go for a 20 mile ride. THEN when you STOP driving,,,,

    go drink your 2 cups of coffee
    because they will be STILL BE THERE sittihg on your back bumper and tool box.

    Towing Reverse = Pin Point Backing up of the entire RIG.
    You can Jack knife the trailerRIGs,, PAST 90 Degrees in either Directions.
    And then you can STILL STEER out of the +90 degree jackknife by continuing to DRIVE BACKWARDS.
    UNBELIEVABLE but TRUE.


    I'm gonna post this as a response now before my Wifi burps AGAIN, .
    and I lose all this good typing again.
    I will post more soon.
    thanks
    peace
    pete

  17. #17
    Join Date
    Sep 2010
    Location
    Taxxachusetts
    Posts
    301

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Pete
    Just watched your video. Great rig. To bad im Too Tall for the camper. Good luck with the sale.
    14 SA200's from 1936 to 1973
    SA250, Classic 300D she hasnt seen yet...Yes she has
    ESAB Power Cut 1600
    2 LN25 innershield, Mig
    Magnum SG Spool Gun / Control Module
    Tig Module K930
    250/250 round top
    Power Mig 180C

  18. #18

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Hi everyone,
    petethewelder here,,

    I tried to sell out a year or so ago,, but then the transmission died and it took me till NOW to get it all fixed back up again.
    Name:  for sale.jpg
Views: 2503
Size:  62.0 KB
    Here I am AGAIN,, but this time
    everything runs great and works fine
    and
    my price for everything is LESS THAN 30K
    Welding RIG truck PLUS sleeper Camper PLUS Weld utility Trailer.
    EVERYTHING you see in the video is less than 30K
    see video here

    On Ebay NOW
    see here;
    http://www.ebay.com/itm/Welding-Truc...mercial_Trucks



    thank you for your consideration
    pete
    michigan phone
    248-802-8565

  19. #19
    Join Date
    Dec 2004
    Location
    Alberta, Canada
    Posts
    2,330

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Good luck Pete!
    If you don't want to stand behind our Troops, feel free to stand in front of them.

  20. #20
    Join Date
    May 2008
    Location
    Orange, TX
    Posts
    17,349

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Nice rig but I couldn't buy it. My name's not Pete!

    Good luck on the sale.
    MM200 w/Spoolmatic 1
    Syncrowave 180SD
    Bobcat 225G Plus - LP/NG
    MUTT Suitcase Wirefeeder
    WC-1S/Spoolmatic 1
    HF-251D-1
    PakMaster 100XL
    '68 Red Face Code #6633 project
    Star Jet 21-110

    Save Second Base!

  21. #21
    Join Date
    Dec 2010
    Location
    b.c. canada
    Posts
    571

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Nice rig to bad not legell to have a trailer pulling a trailer here

  22. #22
    Join Date
    Sep 2013
    Location
    Costa Rica
    Posts
    2,324

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Quote Originally Posted by abec View Post
    Nice rig to bad not legell to have a trailer pulling a trailer here
    Maybe you could link a moose in the middle ?
    Bubble gum
    Tooth pix
    Duct tape
    Black glue
    GBMF hammer
    Screw gun --bad battery (see above)

  23. #23

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    ACTUALLY,
    the way that the two trailers join together IS LEGAL to drive OTR.
    When they are joined together they are LEGALLY ONE TRAILER.
    they become ONE connected frame with six tires.
    APPROVED by a Michigan State Police officer by the side of the road.

    The ONLY reason I made them join together? was because it is illegal in most states to pull a trailer with a trailer.

    Also, when they are together,, NO ONE can see that they are two trailers and not one.
    The michigan cop only knew because he saw two trailer license plates.
    He loved it and said it was legal.

    Problem solved.
    http://www.ebay.com/itm/Welding-RIG-...mercial_Trucks
    peace
    pete
    248-802-8565
    Last edited by petethewelder; 06-23-2014 at 10:26 AM.

  24. #24
    Join Date
    Dec 2010
    Location
    b.c. canada
    Posts
    571

    Re: You can not BEAT this Welding RIG but you can BUY IT.

    Hmmm then It would be the moose pulling it lol. We have the most twisted messed up trailer laws here you can ever imagine most insurance agents don't understand them properly I'm no better lol but if it's two trailers it two trailer unless you welded them together they wouldn't allow it. It's messed cause you go to Alberta and you can tow a holiday trailer and have you boat behind it

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement