Are you out of the red skull Timmy?
Are you out of the red skull Timmy?
I just got that in, and have more coming. Enough for seven hats. And just got crawfish and have more on the way. This is another rare, discontinued fabric that I searched all over for and finally found like the last little batch and bought it all up. Mom made me one of these years back, and I always wanted another one but never could find it till just recently.
![]()
We received our hats today. Very good quality and both fit our noggins well! Excellent job Timmy! I'm going to look for a certain material that I want and send it to you for a couple more if I can find it! How much material is needed for a hat?
If anyone needs a hat, Timmy's your man!![]()
Glad to hear they fit, and thanks for posting the pic while my real computer is down! It takes about a half yard to make a hat.
Be careful about drying those. All my hat material is pre shrunk beforehand, but you never can tell... I put mine on the dash in the truck in the sun to dry.
kuzineddie's hats:
![]()
Davidbrown's hats:
![]()
Can't wait! The boys are going to be jealous!
Constant Current Weldor.
i hate looking at this thread. i have way over a dozen welding hats in my locker but everytime i see a new pattern i want it. the mrs says she'll brain me with the spatula if another one shows up in the mail.
i.u.o.e. # 15
queens, ny and sunny fla
You sure do a super job on those hats Timmy, I know I really like mine!
Much better than ANYTHING you can buy in any store, and nicer than other custom hats I've seen.
I really like those Davidbrown hats, very nice design prints!
Any more material left?
Not too crazy about the red one, but the other 3 are awesome! ... hmmm
You still got my measurements on record?
antique Craftsman oxy-acetylene rig
Airco DIP-PAK 200
Hypertherm Powermax 30 XP
'original' Millermatic 211 w/spool gun
2015 AHP AlphaTig 200X
I do have your measurements on file, Dave Padlr. You like the Sailor Jerry Tattoo prints? I have plenty of that, both black and tan.
![]()
DON'T PUT YOUR HATS IN THE DRYER!
You may be able to get by drying them on low...
Better to find a warm place in the sun to dry them, say on the truck dash.
I wash and dry the fabric before I make the hats, but they will still shrink some if you put them in a hot dryer.
I want one of the tattoo jerry hats Tim. Do you still have my measurements?
Thanks!
I do, Steve. How do you want it, black on one side, tan on the other? Or something else?
This is my own personal one, black on one side, alternating black and tan on the other
![]()
Black it is! Nice choice.
I can't start on any new hats till next week, though.
No hurry.mim wearing Randy Rhoads right now lol
Yes! I like the Sailor Jerry Tattoo prints!
All black both sides, for me too, please.
Could you match the layout pretty much identical to the black one you made for Davidbrown in the pictures above?
I really like how you did that one...(with the two honey's on the brim, one on the top side w/the flowers, and the knife through the skull, etc)...looks awesome!
Whenever you can find the time, no rush...and thank you so much!![]()
antique Craftsman oxy-acetylene rig
Airco DIP-PAK 200
Hypertherm Powermax 30 XP
'original' Millermatic 211 w/spool gun
2015 AHP AlphaTig 200X
Looks like I'm just about out of the black Sailor Jerry tattoo, take a few days to get some more in.
No problem, whenever you can work it out is fine.
Thanks, and have a Happy Thanksgiving!
antique Craftsman oxy-acetylene rig
Airco DIP-PAK 200
Hypertherm Powermax 30 XP
'original' Millermatic 211 w/spool gun
2015 AHP AlphaTig 200X
if i didn't have too many hats already this would be my next one.
i.u.o.e. # 15
queens, ny and sunny fla
$100 on eBay?![]()