2016 PowerPro 256Si AC/DC Pulse TIG/Stick/Plasma Multi-Process Welder/Cutter - Page 2
RSS | Subscribe | Contact Us | Advertise | About Us
Page 2 of 2 FirstFirst 12
Results 26 to 28 of 28
  1. #26
    Join Date
    Sep 2012
    Location
    Cupertino, California
    Posts
    361

    Re: 2016 PowerPro 256Si AC/DC Pulse TIG/Stick/Plasma Multi-Process Welder/Cutter

    Beautiful photos--many thanks for providing! The cart is way too cool guy!
    Agape Guy
    Everlast Power I-MIG 200 (dual voltage)
    Everlast PowerArc 200 stick
    Hypertherm Powermax 30
    Way too many power tools
    AWS Member

  2. #27

    Re: 2016 PowerPro 256Si AC/DC Pulse TIG/Stick/Plasma Multi-Process Welder/Cutter

    Just got my 205Si from Everlast Canada (live about 5 minutes from them, so that was an easy delivery... and yes, it's not a 256Si but I don't see a 205Si section) Getting things set up, and this is how I'm switching between air and argon.

    Name:  IMG_6812.jpg
Views: 76
Size:  138.6 KB

    Really looking forward to enjoying this unit!

  3. #28
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    4,889

    Re: 2016 PowerPro 256Si AC/DC Pulse TIG/Stick/Plasma Multi-Process Welder/Cutter

    Good setup. I always recommend to lightly tighten the top 4 screws on the regulator next to the black regulator knob. Sometimes if you accidentally over pressurize the regulator, these will leak air out and allow the oring to blow out. They are tight enough for normal and recommended pressurization, but they can cause leaks or loosen up over time if they are over pressurized.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement