Magneto swap SA200
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 5 of 5
  1. #1

    Magneto swap SA200

    I have a 1976 Blackface SA200. It has an Fairbanks Morse model FMXA4B-16A magneto on it. The guy I purchased it from said he was rebuilding the mag on the kitchen table. While he was out of town his wife cleaned the table off and lost some of the parts. I'm missing the entire bearing and point support plate, and the two gears.

    So since I cant find a new Bearing support assembly. I got my hands on a American Bosch MRD-4A302-WW that was used on a red face SA200. Will it fit directly to my machine or will I have to change out the impulse coupler.

    Thanks in advance for your time.

  2. #2
    Join Date
    Nov 2012
    Location
    ROCKVILLE ,,VA
    Posts
    396

    Re: Magneto swap SA200

    your good!! your # 1 plug wire will be 2 o'clock position , fairs banks is 11 o'clock

  3. #3
    Join Date
    Mar 2009
    Posts
    3,337

    Re: Magneto swap SA200

    Charlie's on the ball !!

    Name:  image.jpeg
Views: 116
Size:  32.5 KB
    "You can't out puke a buzzard"

  4. #4
    Join Date
    Nov 2012
    Location
    ROCKVILLE ,,VA
    Posts
    396

    Re: Magneto swap SA200

    Dam pipeliner !!!PRETTY PICTURES!!

  5. #5
    Join Date
    Mar 2009
    Posts
    3,337

    Re: Magneto swap SA200

    Quote Originally Posted by charlie53843 View Post
    Dam pipeliner !!!PRETTY PICTURES!!
    I put them in the SA200 sticky a couple of years ago. One for the FM too.
    "You can't out puke a buzzard"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement