Lincoln Weldenpower G8000
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 2 of 2
  1. #1

    Lincoln Weldenpower G8000

    I am looking at a Weldenpower G8000, it has the Vanguard twin two cylinder. It is in overall good condition with light use. First is that our welder repair shop said parts are no longer available for this which could at worst finding a circuit board or getting one repaired. Second what would its value be if you were to purchase it for yourself. Thanks

  2. #2
    Join Date
    Mar 2009

    Re: Lincoln Weldenpower G8000

    I've got a 1983 weldanpower 225/125 that I resurrected from the dead. You can find parts or fix what's there. Low houred and clean I'd go upward of $1500ish if I needed it.
    "You can't out puke a buzzard"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement