Laundry table for the wife
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 24 of 24
  1. #1
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Laundry table for the wife

    My wife asked me to build her a rolling table for sorting and folding laundry. I started this last fall but then because of my job change it got put on hold for quite a while. I built it out of 1 inch square tube and some cabinet grade plywood. The dimensions were set by the request to be able to put two laundry baskets on the bottom shelf. Its a bit of a hack job as it is not meant to be furniture, and it will never leave the basement. The finish is water based poly on the wood and Rustoleum semi gloss black from a rattle can. The first version came out too tall and I had to cut three inches off the legs and reattach the casters

    Name:  laundry table 2.jpg
Views: 725
Size:  201.7 KB
    Name:  Laundry table.jpg
Views: 725
Size:  218.6 KB
    Name:  laundry table 4.jpg
Views: 727
Size:  79.2 KB
    Name:  laundry table 3.jpg
Views: 729
Size:  69.4 KB
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

  2. #2
    Join Date
    Jun 2014
    Location
    Southern Illinois
    Posts
    518

    Re: Laundry table for the wife

    Good job Louie. You earned some serious points with that!


    Sent from my iPhone using Tapatalk
    Steve

    Miller Dialarc 250 (1990)
    Miller Maxstar 140 STR (2003)
    Lincoln SA200 Redface Pipeliner (1966)
    Lincoln MP210 (2015)
    Victor and MECO torches

  3. #3
    Join Date
    Jan 2016
    Posts
    2,796

    Re: Laundry table for the wife

    looks nice, simple and clean...

  4. #4
    Join Date
    Jun 2012
    Location
    Bemidji MN
    Posts
    13,401

    Re: Laundry table for the wife

    Looks good, I like it.

    Further proof of:

    Name:  if a man says he will do something.jpg
Views: 645
Size:  53.2 KB
    Dave J.

    Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

    Airco 300 - Syncro 350
    Invertec v250-s
    Thermal Arc 161 and 300
    MM210
    Dialarc
    Tried being normal once, didn't take....I think it was a Tuesday.

  5. #5
    Join Date
    Apr 2006
    Location
    Soda springs,Id
    Posts
    4,293

    Re: Laundry table for the wife

    Since you built it to her specs, you're golden, Louie!! Nice lookin' job!!
    Mike
    Ol' Stonebreaker
    "Experience is the name everyone gives to their mistakes"

    Miller 175 mig
    Miller thunderbolt ac/dc stick
    Victor O/A setup
    Makita chop saw

  6. #6
    Join Date
    Jun 2014
    Location
    Southern Illinois
    Posts
    518

    Re: Laundry table for the wife

    Might be the time to use your bonus points by floating the idea of a new or better welder. If you don’t use those points up quick you will mess up and they expire!


    Sent from my iPhone using Tapatalk
    Steve

    Miller Dialarc 250 (1990)
    Miller Maxstar 140 STR (2003)
    Lincoln SA200 Redface Pipeliner (1966)
    Lincoln MP210 (2015)
    Victor and MECO torches

  7. #7
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Re: Laundry table for the wife

    Might be the time to use your bonus points by floating the idea of a new or better welder. If you don’t use those points up quick you will mess up and they expire!
    Funny you should say that, but I really can't think of a new welder I need. She OK'ed the purchase of the MM 252 in April, and she is bugging me to go buy a plasma cutter for my birthday. I just feel guilty dropping $1500-$1800 on a new plasma cutter that I won't use all that much. Been looking for a used one.
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

  8. #8
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Re: Laundry table for the wife

    Thanks guys.
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

  9. #9
    Join Date
    Apr 2015
    Location
    Fredericksburg, VA
    Posts
    1,103

    Re: Laundry table for the wife

    Quote Originally Posted by Louie1961 View Post
    Funny you should say that, but I really can't think of a new welder I need. She OK'ed the purchase of the MM 252 in April, and she is bugging me to go buy a plasma cutter for my birthday. I just feel guilty dropping $1500-$1800 on a new plasma cutter that I won't use all that much. Been looking for a used one.
    Once you get a plasma cutter you might be surprised at how much you use it. If nothing else, think about simple plasma art to start with.
    Millermatic 252 MIG
    Miller Dynasty 200DX TIG
    Miller Spectrum 375 Plasma
    Altas 12x36 Metal Lathe
    Bridgeport Milling Machine
    www.psacustomcreations.com

  10. #10
    Join Date
    Feb 2014
    Location
    n.w. of chicago
    Posts
    451

    Re: Laundry table for the wife

    Quote Originally Posted by Louie1961 View Post
    Funny you should say that, but I really can't think of a new welder I need. She OK'ed the purchase of the MM 252 in April, and she is bugging me to go buy a plasma cutter for my birthday. I just feel guilty dropping $1500-$1800 on a new plasma cutter that I won't use all that much. Been looking for a used one.
    We had plasma cutters at work on some jobs and used them alot, about 10 years ago I bought a thermal dynamics 82 when they came outcause I was doing a lot of heavier plow/ equipment repair on the side it still cuts nice and has been good but it's the least used piece of equipment I ever bought, for most of what I do I want more accurate cuts and fit in other words if your doing heavy and close is good enough they may be fine or have a NC machine and doing repetitive parts, 1000k plus buys a lot of cutoff wheels and bandsaw blades which you still need anyway, rant over, just really my stupidest purchase ever

  11. #11
    Join Date
    Mar 2017
    Location
    bar stool
    Posts
    664

    Re: Laundry table for the wife

    Does the top flip up for access to the tub & scrub board or she a tall woman?
    Where does she mount the wringer?

  12. #12
    Join Date
    Nov 2012
    Location
    new york city
    Posts
    5,850

    Re: Laundry table for the wife

    louie; you're the man but you made a bad mistake. now that the mrs sees what you can do and how handy that laundry table is the "requests" will start pouring in. next project will be a sheet mangle
    i.u.o.e. # 15
    queens, ny and sunny fla

  13. #13

    Re: Laundry table for the wife

    Quote Originally Posted by docwelder View Post
    louie; you're the man but you made a bad mistake. now that the mrs sees what you can do and how handy that laundry table is the "requests" will start pouring in. next project will be a sheet mangle
    There are worse things than getting roped into welding projects!

  14. #14
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Re: Laundry table for the wife

    Actually Joe you are half right (or more). I have about 15 requests from family and friends who want their own version of this table. The wife actually wants me to start working on some welded steel and wood furniture. She was inspired by Bonzoo's last table. And Bob is right, there are worse things in this world that getting pressed into welding projects.
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

  15. #15
    Join Date
    Dec 2011
    Posts
    259

    Re: Laundry table for the wife

    It would be neater to use a threaded insert for the legs instead of welding on plates. Then the threaded caster makes it a much cleaner and easier installation. Amazon carries them search for threaded square tube insert. They come in at least 1", 1 1/4 and 1 1/2" sizes for sure the thread is standard caster stem thread 3/8 16 tpi and that also give you adjustment for slightly uneven floor or stand slightly out of square(not that that would be a problem, but things warp.) I just did a Kiln stand for my wife's glass hobby and it works great using the inserts and casters.

  16. #16
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    803

    Re: Laundry table for the wife

    Hey Louie, you could use those points to get me a plasma,.
    NRA LIFE MEMBER
    UNITWELD 175 AMP 3 IN1 DC MIG/STICK/TIG
    MIDSTATES 300 AMP AC MACHINE
    GOD BLESS AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  17. #17
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Re: Laundry table for the wife

    It would be neater to use a threaded insert for the legs instead of welding on plates
    Good idea. Maybe on the next 15 I have to make.

    Hey Louie, you could use those points to get me a plasma
    Umm ok, I guess....NOT
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

  18. #18
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    803

    Re: Laundry table for the wife

    Quote Originally Posted by louie1961 View Post
    good idea. Maybe on the next 15 i have to make.



    Umm ok, i guess....not
    well dang, we have not, because we ask not.
    NRA LIFE MEMBER
    UNITWELD 175 AMP 3 IN1 DC MIG/STICK/TIG
    MIDSTATES 300 AMP AC MACHINE
    GOD BLESS AMERICA!
    “Freedom is never more than one generation away from extinction.
    We didn’t pass it to our children in the bloodstream".
    RONALD REAGAN

  19. #19
    Join Date
    Sep 2016
    Location
    Near Traverse City, Mi.
    Posts
    233

    Re: Laundry table for the wife

    Is that a 3/4" ply top? That'll hold a lot o laundrt...
    Miller Dynasty 280 DX, Lincoln 210 MP

  20. #20
    Join Date
    Apr 2016
    Location
    CA
    Posts
    4,216

    Re: Laundry table for the wife

    I hate to be that guy cause it looks good but until you sand the plywood all smooth you will be picking splinters out of everything that touches it :P
    '65 Lincoln Idealarc 250 AC/DC
    L-tec PCM-VPi 40A plasma
    ESAB REBEL EMP 215ic
    ESAB Mig Master 250
    Victor Performer O/A

  21. #21
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Re: Laundry table for the wife

    I hate to be that guy cause it looks good but until you sand the plywood all smooth you will be picking splinters out of everything that touches it :P
    So, it is sanded and has 2 coats of poly on it. I may nail or glue on some trim pieces on the edges however. The wife has been using it for a few days now and loves it. I just asked...no problem with splinters.
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

  22. #22
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Re: Laundry table for the wife

    Is that a 3/4" ply top? That'll hold a lot o laundry...
    Yeah, it was the only cabinet grade stuff they had, which made my surface prep a lot easier. But yeah, 1 inch square tube with .120 wall thickness, and 3/4 inch plywood. I am a tad over 300 lbs and I stood on it without a problem. It will hold pretty much anything she wants it to, including the washing machine.
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

  23. #23
    Join Date
    Sep 2012
    Location
    Cupertino, California
    Posts
    360

    Re: Laundry table for the wife

    Louie, that's the bomb---beautiful work! My .02
    Quote Originally Posted by Louie1961 View Post
    My wife asked me to build her a rolling table for sorting and folding laundry. I started this last fall but then because of my job change it got put on hold for quite a while. I built it out of 1 inch square tube and some cabinet grade plywood. The dimensions were set by the request to be able to put two laundry baskets on the bottom shelf. Its a bit of a hack job as it is not meant to be furniture, and it will never leave the basement. The finish is water based poly on the wood and Rustoleum semi gloss black from a rattle can. The first version came out too tall and I had to cut three inches off the legs and reattach the casters

    Name:  laundry table 2.jpg
Views: 725
Size:  201.7 KB
    Name:  Laundry table.jpg
Views: 725
Size:  218.6 KB
    Name:  laundry table 4.jpg
Views: 727
Size:  79.2 KB
    Name:  laundry table 3.jpg
Views: 729
Size:  69.4 KB
    Agape Guy
    Everlast Power I-MIG 200 (dual voltage)
    Everlast PowerArc 200 stick
    Hypertherm Powermax 30
    Way too many power tools
    AWS Member

  24. #24
    Join Date
    Jun 2012
    Location
    CT
    Posts
    3,038

    Re: Laundry table for the wife

    Louie, that's the bomb---beautiful work! My .02
    Thanks man!!
    Millermatic 252
    Syncrowave 250
    Purox Metalmaster

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement