Dynasty 200 DX
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 3 of 3

Thread: Dynasty 200 DX

  1. #1
    Join Date
    Jun 2014
    Posts
    75

    Dynasty 200 DX

    I was able to get this machine after a change out . I was told it will start an arc, I'm assuming TIG on steel, then the arc will blow out. I don't have it rewired yet ,so I'm not exactly sure what it's doing or not doing. My question is , are there any big problems that are common with this machine. I had used it a few years ago and it ran great. Something took a crap on one of the boards I think , it was sent out and when it came back and this is what we have. I'm just wondering if it's worth putting the money into it if it is a board? Thanks for your help.

  2. #2
    Join Date
    Oct 2014
    Posts
    221

    Re: Dynasty 200 DX

    I guess that would depend on if the board it needs costs $5 or $5000.

    It could be something simpler or a main expensive board/part.

    I think you should get it powered up and see what it is doing then try to troubleshoot it.

  3. #3
    Join Date
    Jun 2014
    Posts
    75

    Re: Dynasty 200 DX

    That's what I'm going to do . I was just wondering if there were any "common" problems. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement