Vulcan Protig 165 connector?
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 6 of 6
  1. #1
    Join Date
    Oct 2005
    Location
    Montrose, CO
    Posts
    162

    Vulcan Protig 165 connector?

    Does anyone know what type of connect the Protig 165 used for the remote hookup? Also could use a wiring diagram if someone has it. Thanks
    Dynamic Metalworks
    Montrose, CO

    DynMetalworks.com

  2. #2
    Join Date
    Mar 2018
    Location
    Tampa, Florida
    Posts
    599

    Re: Vulcan Protig 165 connector?

    The pro-Tig has a 9 pin connector for the foot controller, a wiring diagram can be found in the back of the manual, available online here. https://manuals.harborfreight.com/ma...3999/63618.pdf
    -Mark Smith

    Vulcan ProTig200
    Vulcan MigMax 215
    Hypertherm PowerMax45 Xp

  3. #3
    Join Date
    Oct 2005
    Location
    Montrose, CO
    Posts
    162

    Re: Vulcan Protig 165 connector?

    Thanks

    Do you know what type of 9-pin connector it is?
    Dynamic Metalworks
    Montrose, CO

    DynMetalworks.com

  4. #4
    Join Date
    Mar 2018
    Location
    Tampa, Florida
    Posts
    599

    Re: Vulcan Protig 165 connector?

    Quote Originally Posted by BryanDowdy View Post
    Thanks

    Do you know what type of 9-pin connector it is?
    Can’t say that I do know what type it is, as I’m not familiar with the terminology. However here are a couple of photos that may help.

    If you’re looking for an aftermarket pedal, SSC controls sells one.

    Name:  D7E23FEB-7CB3-414E-B848-593E82FAD455.jpg
Views: 37
Size:  53.7 KB
    Name:  E7667C59-404C-4026-9148-3E5D1F90C8D8.jpg
Views: 37
Size:  83.8 KB
    -Mark Smith

    Vulcan ProTig200
    Vulcan MigMax 215
    Hypertherm PowerMax45 Xp

  5. #5
    Join Date
    Dec 2010
    Location
    SoCal-LA
    Posts
    8,673

    Re: Vulcan Protig 165 connector?

    FYI, the connector is the same for the ProTig 165 and 200. And as said above SSC controls uses them.
    Weld like a "WELDOR", not a wel-"DERR"
    MillerDynasty700DX,Dynasty350DX3ea,Dynasty200DX,Th ermalArc400GTSW,LincolnSW2002ea., MillerMatic350P,MillerMatic200withspoolgun,MKCobra Mig260,Lincoln SP-170T,PlasmaCam/Hypertherm1250,HFProTig3ea.

  6. #6
    Join Date
    Oct 2005
    Location
    Montrose, CO
    Posts
    162

    Re: Vulcan Protig 165 connector?

    Thanks for the pictures, that really helps. Needing the plug type to adapter my tig switch over.
    Dynamic Metalworks
    Montrose, CO

    DynMetalworks.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement